Skip to the answer

Garment labeling: what a US clothing label must show

By Nation 11 min read

Quick answer

Garment labeling in the US is set by the Textile Fiber Products Identification Act, which requires most clothing to carry a label with fiber content, country of origin and identity of the manufacturer or another business that handles it. The rule applies to anyone who manufacture, import, sell, offer to sell, distribute or advertise covered products, and the FTC's guide lists no exemption for handmade or small sellers. Care instructions come under a separate FTC rule.

Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, and this page is general information, not legal advice. See where Nation fits.

Garment labeling: the three required disclosures

Federal garment labeling rules come from the Textile Fiber Products Identification Act, 15 U.S.C. § 70, and the Textile Rules the FTC wrote under it. The FTC's guide to the Textile and Wool Acts says most of these products need a label listing fiber content, country of origin and identity of the manufacturer or another business responsible for marketing or handling the item.

That gives every covered garment three required disclosures. The table sets out each one, what it has to say and the detail sellers most often get wrong.

Required information on a US clothing label under the Textile Act
DisclosureWhat it must sayCommon detail
Fiber contentFibers by generic names, with percentages by weight, in descending order of predominanceName only fibers at 5% or more of the fiber weight; smaller amounts are listed as “other fiber” or “other fibers”
Country of originFor imports, the name of the country where it was processed or manufacturedOn garments with a neck it goes at the inside center of the neck; The country of origin must be on the front of the label.
Maker or dealer identitythe full name under which the company does business, or the company's RNIt cannot be a trademark, trade name, brand, label or designer name, unless that is the legal business name

The three disclosures can share one label, and they can share the care label too: the Textile Rules allow them on any attached label, including the care label required by 16 CFR part 423. What the care label itself must say is covered in the care labels guide.

Who the textile labeling rules cover, and which products

Textile labeling duties apply to anyone who manufacture, import, sell, offer to sell, distribute or advertise covered products. A small brand that sews its own pieces, a reseller of private-label blanks and an importer all fall under the same rule. The FTC's guide lists no exemption based on business size or on an item being handmade.

On the product side, the FTC's covered list starts with Clothing, except for hats and shoes, then adds scarves and household textiles such as bedding, towels and tablecloths. The excluded categories are set by product type.

  • Hats and similar items: Headwear, including hats, caps or anything worn exclusively on the head are outside the Textile Act. Wool hats still fall under the Wool Rules.
  • Footwear: Shoes, overshoes, boots, slippers and all outer footwear are excluded, but socks and hosiery are covered.
  • Some accessories are excluded unless you make a fiber claim about them: Belts, suspenders, arm bands, permanently knotted neckties, garters and a few other items.
  • Used goods: Secondhand household textile articles which are discernibly secondhand or marked as secondhand are excluded.

The accessory exclusion ends as soon as you describe the fiber. The FTC says that once you make any representation about fiber, all the requirements for fiber content disclosure apply. Example: a belt listed as "pure silk" would need a full fiber content disclosure.

How to write a fiber content label

A fiber content label lists each fiber by its generic name, such as cotton, polyester, nylon or spandex, with its percentage by weight, in descending order of predominance. If a garment is made of a single fiber, you may use the word “All” instead of “100%.”

Example: a T-shirt blend could read "60% Cotton, 40% Polyester". The numbers in that example are the seller's own measurement, not a rule. The rules that govern the numbers are below.

  • Small fibers: you may name only fibers at 5% or more of the fiber weight. Smaller amounts are disclosed as “other fiber” or “other fibers”, unless the fiber is named because of its function. The FTC allows this if the fiber has a definite functional significance at that amount, for example a small amount of spandex used for stretch.
  • Wool is the exception: you must disclose wool or recycled wool by name and percentage weight, even if it is less than 5% of the product.
  • Tolerance: the FTC allows a 3% tolerance for fiber content claims, for unintended variation in manufacturing. No tolerance is allowed if the label states that a product contains one fiber, so a blouse with any added polyester cannot be labeled all silk.
  • Trim and decoration: decorative trim is exempt as long as it does not exceed 15% of the surface area, and elastic is treated as trim if it does not exceed 20% of the surface area. The label then adds "exclusive of decoration" or "exclusive of elastic".
  • Type size: all parts of the fiber content must be in type or lettering of equal size and conspicuousness. You cannot print one fiber in capitals to make it stand out.

Linings, fillings and paddings used only for structure do not need to be disclosed. For linings and fillings, the FTC adds: If used for warmth, though, the fiber must be disclosed. They are listed as a separate section, for example "Shell: 100% Nylon, Lining: 100% Polyester" in the FTC's own example format.

Country of origin on clothing labels

Imported garments must be labeled with the name of the country where it was processed or manufactured. A region is not enough: the FTC notes that it is not sufficient to disclose that a product was made in the European Union instead of the specific country.

Clothing made in the US has its own wording rules. A plain "Made in USA" label is allowed only if the product is made completely in the U.S. of materials that were made in the U.S. If any material is imported, the label must say so, for example “Made in U.S.A. of imported fabric”. The made in USA labels guide covers these claims in more detail.

  • Placement: on a garment with a neck, the country of origin label goes at the inside center of the neck, midway between the shoulder seams or close to another label at the inside center of the neck.
  • Side of the label: The country of origin must be on the front of the label. Fiber content and maker identity may appear on the front or back of the same label.
  • Attachment: the required labels must be securely attached to the product until it is delivered to the consumer. The care label has a stricter rule: it must be attached permanently and securely. Because the Textile Rules let the other disclosures share the care label, many brands put everything on one sewn-in label.

Maker identity: your business name or an RN

The third disclosure names the manufacturer, importer or another business that markets or handles the garment. If you use a name, it must be the full name under which the company does business, meaning the name that appears on business documents like purchase orders and invoices. It cannot be a trademark, trade name, brand, label or designer name, unless that is also your legal business name.

Instead of the name, you can print a Registered Identification Number from the FTC. The FTC states plainly: An RN is not required in order to do business in the U.S. The RN number guide explains how to apply and how to look one up.

Textile labeling rules for online listings

Selling online adds disclosure duties to the listing itself. The FTC's guide says Written advertising includes internet advertising. If a listing mentions a fiber, the fiber content information on the label must appear in the ad, minus the percentages.

Country of origin also applies to the listing. When a product is advertised in a catalog or other mail order material, including on an internet site, the description must include a clear statement that the item was “made in U.S.A.,” “imported” or “made in U.S.A. and [or] imported.” The listing must match the label on the product.

  • Add fiber names to each product description in the same order as the label.
  • Add "Made in USA", "Imported" or both to each product description.
  • Check that product photos of the label match the text, especially after changing suppliers.

Clothing label requirements checklist for a new garment

Example: a small brand sews hoodies in the US from fabric bought from an overseas mill and sells them on its own website. The steps below follow the rules on this page.

  1. Confirm the product is covered

    A hoodie is clothing, which is covered. Hats, shoes and some accessories follow different rules, so check each product type in your range.

  2. Get the fiber content from the fabric supplier

    Ask the mill for the fiber breakdown by weight and keep it on file. List fibers by generic name, in descending order of predominance, within a 3% tolerance.

  3. Write the origin line

    The fabric is imported, so a plain Made in USA label is not allowed. A line in the form of “Made in U.S.A. of imported fabric” fits the case.

  4. Choose name or RN

    Print the full name under which the company does business, or apply for an RN if you prefer a short code.

  5. Add the care instructions

    The separate Care Labeling Rule requires makers and importers to attach care instructions to garments. The Textile Rules let fiber, origin and identity share the care label, so one sewn-in neck label can carry all of it.

  6. Update the product page

    Repeat the fiber names and the origin statement in the online description so the listing matches the label.

Handmade clothing, licenses and penalties

Handmade clothing is covered the same way as factory-made clothing under the Textile Act. The only handmade-related exemption on these pages sits in the separate care rule: care instructions are not required for Garments custom-made of material provided by the consumer That exemption does not remove the fiber, origin and identity label.

The FTC's textile rules do not include a license to sell clothes, and an RN is optional. Business licenses and seller's permits for sales tax are set by states, counties and cities, so check with yours before you sell.

Mislabeling can be costly. The FTC can issue an order against a business that mislabels, and a business that violates such an order faces civil penalties of up to $53,088 per violation. The FTC counts each instance of mislabeling as a separate violation. Rules on this page are federal; states and cities can add their own requirements. This page is general information, not legal advice.

Where Nation fits

Nation

Category: an AI store builder

Publisher

Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. It does not label garments or check labels for you.

Limits today

  • Status: open: describe what you make in the app onboarding and the store builds itself.
  • Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
  • Shopper marketplace: no shopper marketplace has been announced.
  • Track record: no independent reviews or public stores yet.

Nation publishes this page. The labeling rules come from FTC and eCFR pages, and Nation is not a source for any of them.

Describe what you make

Questions about clothing label requirements

What are the clothing label requirements in the USA?

Clothing label requirements in the USA come from the Textile Fiber Products Identification Act. Most garments need a label with fiber content, country of origin and identity of the manufacturer or another business that handles them. The FTC's separate Care Labeling Rule requires makers and importers to attach care instructions to garments. States and cities can add their own rules.

What is the Textile Fiber Products Identification Act?

The Textile Fiber Products Identification Act, 15 U.S.C. § 70, is the federal law behind US textile labeling. The FTC enforces it through the Textile Rules. It applies to anyone who manufacture, import, sell, offer to sell, distribute or advertise covered products, and it requires fiber content, country of origin and maker identity on the label.

How do you write a fiber content label?

A fiber content label lists each fiber by its generic name with its percentage by weight, in descending order of predominance. You name only fibers at 5% or more of the fiber weight and list smaller amounts as “other fiber” or “other fibers”. Wool is the exception and is always named. A single-fiber garment may say all instead of the percentage.

Does handmade clothing need a fiber content label?

Handmade clothing needs a fiber content label if it is a covered garment, because the Textile Act rules apply to anyone who manufacture, import, sell, offer to sell, distribute or advertise covered products. The FTC lists no exemption for handmade or small sellers. The exclusions depend on product type, such as hats, shoes and some accessories.

Do I need a license to sell clothes?

Selling clothes does not require a license under the FTC's textile rules, and the FTC says An RN is not required in order to do business in the U.S. Your state, county or city may require a business license or a seller's permit for sales tax. Check with your state revenue department and local government, because these rules vary by location.

Describe what you make

Nation is an AI store builder. It is open: describe what you make in the app onboarding and the store builds itself. Describe what you make and continue in the app.