Quick answer
Cold process and hot process both make true soap from oils and lye: cold process is poured as a liquid and left to cure for weeks, while hot process is cooked until the reaction finishes, so bars can be used sooner but look more rustic. Melt and pour skips the lye step, but some melt and pour bases contain synthetic detergents, and under FDA rules a bar that contains synthetic detergents is a cosmetic, with cosmetic labeling and MoCRA duties.
Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, and this page is general information, not legal advice. See where Nation fits.
Cold process vs hot process soap vs melt and pour at a glance
Cold process and hot process are two ways to run the same chemical reaction. You mix oils or fats with a lye solution, and the lye turns the oils into soap. FDA describes the result plainly: when soap is made properly, no lye remains in the finished product. The difference between the two methods is how you manage the time and heat that reaction needs.
In cold process, you mix oils and lye at a moderate temperature, pour the thick liquid into a mold and let it set. The reaction finishes in the mold over the following day, then the bars cure on a rack for several weeks while water evaporates and the bar hardens. In hot process, you cook the same mix in a slow cooker or double boiler until the reaction is complete, then spoon the thick paste into a mold. The bars can be cut sooner and need less curing, but the surface is rougher and swirl designs are harder.
Melt and pour works differently. You buy a ready-made base, melt it, add color and scent, and pour. There is no lye to handle, and the bars are ready once they harden. The trade is that you did not make the soap, and the base decides what kind of product you are selling.
Many soap makers start with melt and pour to learn molds, scent and packaging, then move to cold process for a signature line. Hot process suits sellers who need stock quickly or prefer a rustic look.
Cure time, batch size and cost for a soap business
Cure time is the biggest planning difference. Cold process bars sit on drying racks for weeks before they are ready to sell, so your stock is tied up and you need shelf space that stays dry and away from dust. A holiday order that arrives late cannot be filled from a batch you pour that week. Hot process shortens that wait, which helps when a market date or wholesale order is close. Melt and pour has almost no wait.
Batch size follows from the equipment. A cold process maker can scale up with a bigger mixing pot and loaf molds, since the reaction runs in the mold without extra heat. Hot process batches are limited by the size of the cooking vessel and how much thick paste you can stir and spoon before it sets. Melt and pour batches are limited by how much base you can melt and pour while it is fluid, which suits small runs and custom orders.
Cost works the other way. Oils, butters and lye for cold or hot process cost less per bar than a premade melt and pour base, but you pay in time, safety gear, scales and curing space. Example: a maker selling at weekend markets who needs a few dozen bars for next Saturday might use melt and pour for that week and cold process for stock that will sell next month. Your own supplier quotes set the actual numbers.
- Cold process: lowest cost per bar, longest wait, most design control.
- Hot process: same ingredients, shorter wait, more stirring time and a rustic finish.
- Melt and pour: fastest, no lye, but the base sets the cost and often the legal category.
Melt and pour vs cold process soap: the regulatory catch
The legal difference between melt and pour and cold process soap comes from how the US defines soap. In its definition of a cosmetic, the Federal Food, Drug, and Cosmetic Act specifically excludes soap, and FDA's regulation at 21 CFR 701.20 sets the test. A product counts as soap only when the bulk of the nonvolatile matter in the product consists of an alkali salt of fatty acids, when the detergent properties of the article are due to the alkali-fatty acid compounds, and when it is labeled, sold, and represented only as soap. FDA's soap FAQ adds that all three conditions must be met.
Cold process and hot process bars made from oils and lye usually pass the first two tests. Some melt and pour bases do not, because they include synthetic surfactants that help the base melt cleanly and lather. FDA's answer is direct: if the product contains synthetic detergents, it is a cosmetic. FDA also notes that Most body cleansers, both liquid and solid, are synthetic detergent products, so a base sold as soap may still be a detergent bar. Check the base's full ingredient list, or ask the supplier, before you decide how to label and sell it.
Claims can move any bar out of the soap category, whatever method made it. If you sell a bar for purposes such as moisturizing the skin, making the user smell nice, or deodorizing the user’s body, FDA treats it as a cosmetic. If you say it will treat or prevent disease, such as by killing germs, or treating skin conditions, such as acne or eczema, it is a drug, with drug rules on top. You can still use the word “soap” on the label in either case, but the rules that apply change.
What changes when your bar is a cosmetic
A true soap sold only as soap is regulated by the Consumer Product Safety Commission (CPSC), not FDA. A detergent bar, or any bar marketed with cosmetic claims, falls under FDA. Neither a cosmetic nor its ingredients need FDA approval before sale, except for any color additives it contains, and FDA's fact sheet for small businesses says: FDA does not license cosmetics firms. Making cosmetics at home is allowed. In FDA's words: It’s not against the law to manufacture cosmetics in your home. You are responsible for making them in an environment that will not cause them to become adulterated, and for labeling them correctly.
The Modernization of Cosmetics Regulation Act of 2022 (MoCRA) added duties for the responsible person, which FDA defines as the manufacturer, packer, or distributor of a cosmetic product whose name appears on the label. The list below covers the ones a small soap seller is most likely to meet. Some depend on size: MoCRA exempts certain small businesses from GMP, registration, and product listing requirements, so check whether the exemption covers your business before you file.
- Ingredient label: a cosmetic must declare each ingredient in descending order of predominance, except that fragrance or flavor may be listed as fragrance or flavor.
- Net weight: a cosmetic bar needs an accurate statement of the weight of the bar in avoirdupois pounds and ounces, displayed prominently on the label.
- Product listing: the responsible person must list each marketed cosmetic product with FDA, including product ingredients, and provide any updates annually, unless exempt.
- Facility registration: manufacturers and processors must register and renew their registration every two years, unless exempt.
- Adverse events: serious adverse events must be reported to FDA within 15 business days.
- Safety records: the responsible person must ensure and maintain records supporting adequate safety substantiation of their cosmetic products.
Words such as natural or organic do not change any of this: FDA's laws and regulations do not have definitions for “natural” or “organic.” States and cities can add their own business license, sales tax and labeling rules, and those vary by location. This page is general information, not legal advice.
How to choose a soap making method for your business
Work through these in order. The answers usually point to one main method, sometimes with melt and pour as a side line.
Decide what you want to sell as
If you want to sell a true soap that FDA does not regulate as a cosmetic, you need a bar made mainly of alkali salts of fatty acids and sold only as soap. That points to cold process or hot process.
Check how fast you need stock
If orders and markets come with short notice, hot process or melt and pour shortens the wait. If you can plan weeks ahead, cold process gives the most control over design and cost.
Read your base's ingredient list
If you use melt and pour, find out whether the base contains synthetic detergents. If it does, plan for a cosmetic ingredient label and check MoCRA listing and registration.
Write claims last
Moisturizing, scent or deodorizing claims make the bar a cosmetic, and germ-killing or skin-condition claims make it a drug. Keep claims to cleansing if you want the soap category.
Check your state and city
Look up local business license and sales tax rules, and any state labeling rules, before your first sale.
Where Nation fits
Nation
Category: an AI store builder
Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. It does not make or label soap, and this page does not depend on it.
Limits today
- Status: open: describe what you make in the app onboarding and the store builds itself.
- Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
- Shopper marketplace: no shopper marketplace has been announced.
- Track record: no independent reviews or public stores yet.
Nation publishes this page. It is general information about soap making methods and federal rules, not legal advice.
Describe what you makeQuestions about cold process, hot process and melt and pour soap
What is the difference between cold process and hot process soap?
Cold process and hot process soap use the same oils and lye. Cold process is poured as a liquid and finishes reacting in the mold, then cures for weeks. Hot process is cooked until the reaction is complete, so bars are usable sooner but look more rustic and are harder to swirl.
Is melt and pour soap real soap?
Melt and pour soap is real soap only if the base meets FDA's definition: mostly alkali salts of fatty acids that do all the cleaning, sold only as soap. If the product contains synthetic detergents, it is a cosmetic under FDA rules, even though You can still use the word “soap” on the label.
Is melt and pour or cold process soap better for a soap business?
Melt and pour or cold process soap suits different businesses. Melt and pour is faster, needs no lye and fits small custom runs, but the base costs more and may make the bar a cosmetic. Cold process costs less per bar and gives full recipe control, but stock needs weeks to cure.
Do I need to register handmade soap with the FDA?
Handmade soap that meets FDA's soap definition and is sold only as soap is regulated by the Consumer Product Safety Commission (CPSC), not FDA. Detergent bars and bars sold with cosmetic claims are cosmetics, and MoCRA requires product listing and facility registration, though it exempts certain small businesses from GMP, registration, and product listing requirements. Rules vary, so check your case.
Does hot process soap need to cure?
Hot process soap needs less curing than cold process, because the cooking step finishes the reaction before the soap goes into the mold. Many makers still let the bars dry for a while so they harden and last longer in the shower. The exact time depends on the recipe and how much water it used.