Quick answer
FD&C colors are synthetic color additives that FDA batch certifies, named with a prefix FD&C, D&C, or External D&C; a color; and a number. Every color additive, certified or exempt like mica and iron oxides, must be approved by FDA for the exact use, so a color allowed on skin may not be allowed on lips or near the eyes. Red 3 loses its food approval on January 15, 2027.
Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, and nothing on this page is a ranking. See where Nation fits.
What FD&C colors are
FD&C colors are color additives that FDA tests and certifies batch by batch before they can be sold for use in food, drugs or cosmetics. They are derived primarily from petroleum, and FDA groups them with the D&C and External D&C colors as colors subject to certification. Their names have a prefix FD&C, D&C, or External D&C; a color; and a number, for example FD&C Yellow No. 5.
The prefix is part of the name. FDA says the certified colors listed for food are called FD&C colors because they also may be used in drugs and cosmetics. The D&C and External D&C prefixes mark other certified colors. The prefix alone does not give permission: each color's own regulation says which products it may go in and in what amounts.
FDA's color additive regulations sit in Title 21 of the Code of Federal Regulations Parts 73, 74, 81 and 82. Color additives listed in 21 CFR Parts 74 and 82 must be analyzed and batch certified by FDA, and this applies to products imported into this country as well as those manufactured domestically.
FDA color additives: certified vs exempt from certification
The law splits approved color additives into those subject to certification and those exempt from certification. Both groups need approval. Only the first group needs a certified batch.
Exempt does not mean natural or unregulated: they still are considered artificial colors, and they must comply with the identity, specifications, uses, restrictions, and labeling requirements stated in the regulations.
A lake is a certified color fixed onto a base. Lakes are not soluble in water, often used to keep a color from bleeding, as in lipstick. Check that the lake form is covered for your use too: some listings, such as the eye area listings for FD&C Red No. 40 and Blue No. 1, name the lake.
FDA approved colorants for cosmetics: lips, eyes and skin
Each color's listing names its allowed uses. Three phrases matter most for a small cosmetics maker. Cosmetics generally covers most products, lips included. Externally applied does not apply to the lips or any body surface covered by mucous membrane. Eye area use must be named in the listing, because colors for general use may not be used in the area of the eye, in injections, or in surgical sutures unless such use is specified.
The table shows how this plays out for colors makers often buy. It is a short sample, so check FDA's summary table for any color not listed here.
Some rules have no exceptions in the listings today. There are no color additives listed in the regulations as approved for injections, which includes tattoo and permanent makeup pigments. For lash and brow tint, silver nitrate is the only color additive approved for dyeing the eyebrows or eyelashes, but for professional use only. Luminescent zinc sulfide is the only approved glow-in-the-dark color additive.
Lip safe mica: what the label should mean
Plain mica is listed for cosmetics generally, including eye area use, so mica itself can go in a lip product. A colored mica is often a blend: mica coated with titanium dioxide, iron oxides or other colors. A blend is only as allowed as its least allowed part.
Example: a blue mica coated with ferric ferrocyanide. That color is listed for externally applied cosmetics, including eye area use, and externally applied does not apply to the lips or any body surface covered by mucous membrane. So the blend can go in an eyeshadow but not in a lip gloss. A pink mica coated with carmine and iron oxides uses colors listed for cosmetics generally, so it can.
"Lip safe" is a supplier's description, not an FDA term. Ask the supplier for the full color list of each blend and check every color against the listing. Glitters need the same check: may form new pigments, which may not be approved for the intended use.
Colors in soap
Whether FDA color rules apply to a bar of soap depends on what the product is. FDA treats a product as soap only when the bulk of the nonvolatile matter in the product consists of an alkali salt of fatty acids and it is labeled, sold, and represented solely as soap. Products that meet that definition are exempt from the provisions of the FD&C Act and are regulated by the Consumer Product Safety Commission (CPSC), not by FDA.
Once a cleanser makes other claims, it changes category. A cleanser intended not only for cleansing but also for other cosmetic uses, it is regulated as a cosmetic. FDA's examples of cosmetic uses include acting as a deodorant, imparting fragrance to the user, or moisturizing the skin. A cleanser that does not meet the soap definition is either a cosmetic or a drug. So a moisturizing soap or a detergent body wash is usually a cosmetic, and its colors must be approved cosmetic colors used within their listings.
If you make soap alongside lotions or bath products, using only colors listed for cosmetics lets the same micas and oxides work across the whole range without a second check.
FD&C Red No. 3: revoked for food from January 2027
On January 15, 2025, FDA issued an order revoking FD&C Red No. 3 for food and ingested drugs. Food makers have until January 15, 2027 to reformulate, and ingested drug makers until January 18, 2028. The order is based on the Delaney Clause of the Federal Food, Drug, and Cosmetic Act, which prohibits FDA authorization of a food additive or color additive if it has been found to induce cancer in humans or animals. FDA also says there is no evidence showing FD&C Red No. 3 causes cancer in humans.
Red No. 3 was already out of cosmetics. When a petition asked FDA to permanently allow it in cosmetics and topical drugs, FDA denied the petition based on the Delaney Clause. It is not in FDA's list of certified colors for cosmetics.
If you sell baked goods, candy or frosting with Red No. 3, switch colors before the deadline. Products may still be on shelves after it if that product was manufactured before the effective date. The order covers Red No. 3 only, so check any other red you switch to against its own listing. On food labels, Red No. 3 can appear as “FD&C Red No. 3”, “FD&C Red 3” or “Red 3”; other countries allow it under a different name, such as erythrosine.
Color additives in food and how to label them
FDA lists seven certified color additives for food, called FD&C colors because they can also be used in drugs and cosmetics. An example is FD&C Yellow No. 6. Exempt colors for food include plant and mineral colors such as annatto, beet powder and turmeric, and mica-based pearlescent pigments. Each food listing sets the types of foods in which it can be used, any maximum amounts allowed to be used, and how the color additive is to be declared on the food label.
A color approved for cosmetics is not approved for food unless its listing says so. FDA advises bakers to avoid using glitter and dust products to decorate cakes and other food items unless the products are specifically manufactured to be edible. That advice covers decorative dusts and glitters that are not made to be eaten.
On a food label, every certified color is named in the ingredient list. certified colors must be declared in the statement of ingredients on food labels.
- Certified colors: use the listed name, and it is not necessary to include the “FD&C” prefix or the term “No.” in the declaration, so FD&C Yellow No. 5 can appear as Yellow 5.
- Lakes: the term “Lake” shall be included in the declaration of the lake of the certified color additive (e.g., Blue 1 Lake).
- Exempt colors: they may be declared as “Artificial Color,” “Artificial Color Added,” or “Color Added”, or as “Colored with ________________” or “________________ color” with the color's name filled in, unless their listing requires the name.
- Exception: When a coloring has been added to butter, cheese, or ice cream, it need not be declared in the ingredient list, unless a color regulation requires it.
Missing colors on food labels lead to enforcement. FDA has sent warning letters for undeclared FD&C Red No. 40 and FD&C Yellow No. 6 in bakery products.
How to list colors on a cosmetic label
Color rules are federal, but how they are enforced, and any extra state rules on cosmetics or food, vary by state and city. This page is general information, not legal advice. For a product you plan to sell, read the color's listing in 21 CFR or ask FDA.
- Put colors last. Color additives of any concentration may be listed in any order after the listing of the ingredients which are not color additives.
- Use the color's listed name. Certified colors can appear by full name or by color and number alone, without a prefix (such as "Yellow 5").
- Shade lines and color matching: a color added only to some batches for matching can be listed after the phrase "May contain".
- Do not swap in a chemical or trade name for a certified color. FD&C Yellow No. 5 is the certified form of tartrazine, and the uncertified form may not be listed as Yellow 5.
- Do not rely on CI numbers when you buy. A CI or E number does not indicate FDA certification.
- Keep your supplier's paperwork. A certified lot's label must show the FDA lot certification number; and the color's uses and restrictions.
How to check a color before you use it
Find the color's listing
Look the color up in FDA's summary of color additives and note its 21 CFR section and group.
Match the use
Check that the listing covers your product: food, cosmetics generally, externally applied only, lips or eye area.
Check limits
Some colors have a maximum amount, for example cosmetic lip products, up to 3% by weight of the finished product for D&C Red No. 33.
Check every part of a blend
For micas, glitters and premixed colors, get the full color list and check each one.
Confirm certification
For certified colors, buy from a supplier whose label shows the FDA lot certification number.
Where Nation fits
Nation
Category: an AI store builder
Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. It does not check color additives or label your products for you.
Limits today
- Status: open: describe what you make in the app onboarding and the store builds itself.
- Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
- Shopper marketplace: no shopper marketplace has been announced.
- Track record: no independent reviews or public stores yet.
Nation publishes this page. It is general information about FDA color rules, not legal advice.
Describe what you makeQuestions about FD&C colors
What does FD&C mean on a color?
FD&C is the prefix on certified colors that FDA lists for food, drugs and cosmetics; FDA says food colors are called FD&C colors because they also may be used in drugs and cosmetics. Certified color names have a prefix FD&C, D&C, or External D&C; a color; and a number. Each color's listing in 21 CFR names its allowed uses.
Are FD&C colors the same as FDA color additives?
FD&C colors are one part of FDA color additives. FDA splits color additives into those subject to certification and those exempt from certification. FD&C, D&C and External D&C colors are in the certified group. Mica, iron oxides and plant colors are exempt but still need approval for each use.
Is mica lip safe?
Plain mica is listed for cosmetics generally, including eye area use, so mica itself is allowed in lip products. Colored micas are blends, and some coatings such as ultramarines and ferric ferrocyanide are listed only for externally applied cosmetics, which excludes the lips. Check every color in the blend before calling it lip safe.
Which FDA approved colorants can be used around the eyes?
FDA approved colorants can be used around the eyes only if their listing names eye area use. Mica, iron oxides, titanium dioxide and carmine are listed with eye area use, as are FD&C Red No. 40, Blue No. 1 and Yellow No. 5 with their lakes. D&C Red No. 7 is not.
When is Red No. 3 banned in food?
FD&C Red No. 3 is revoked for food, and food makers have until January 15, 2027 to reformulate. Ingested drugs have until January 18, 2028. FDA issued the order on January 15, 2025. Red No. 3 was already not allowed in cosmetics after FDA denied a petition for that use.
Can I use a CI number instead of the FD&C name?
A CI number cannot replace the FD&C name when you check a color, because A CI or E number does not indicate FDA certification. On a cosmetic label, a certified color can be listed by full name or by color and number alone, without a prefix (such as "Yellow 5"). Buy certified colors from lots that carry an FDA certification number.