Skip to the answer

How to price 3D prints: filament, machine time and fees

By Nation 10 min read

Quick answer

To price 3D prints, add the filament by weight, the machine time (electricity plus printer wear), an allowance for failed prints, your labour, packaging and overhead, then add profit and build the selling fees into the price. Example: a print that costs $21.32 to make, with a 20% profit, needs a price of $29 on Etsy, where fees take $3.21.

Nation, an AI store builder, publishes this page. It is not in the fee comparison. See where Nation fits.

The formula for pricing 3D prints

The simplest way to price 3D printing is cost-plus: add up what one print costs you, add a profit margin, then set the price high enough that the selling fees come out of the buyer's payment and not out of your margin. 3D prints differ from most handmade goods in one way: the machine does most of the making, so machine hours and failed prints belong in the cost alongside your own time.

Write the formula down once and run every new design through it.

  1. Filament: the grams the slicer reports for the part, supports, brim and purge, multiplied by the cost per gram of the roll.
  2. Machine time: print hours multiplied by an hourly machine rate that covers electricity, printer wear and spare parts.
  3. Failure allowance: a percentage added to filament and machine time for prints that fail, warp or need a reprint.
  4. Labour: your hours for slicing, removing supports, sanding, painting, assembly, photos, listing and packing, at an hourly wage you choose.
  5. Packaging, postage if you ship free, and overhead such as software, a share of tools and shop subscriptions.
  6. Profit: a margin on top of cost.
  7. Selling fees: marketplace, payment and listing fees, built into the price.

Filament, machine time, failures, labour, packaging and overhead add up to your cost. Cost plus profit is the amount you want to keep. The price is that amount plus the fees charged on it.

Worked example: how much to charge for a 3D printed planter

Example: one small PLA planter, sold on Etsy with free shipping, so postage is part of the cost. Every amount in the table down to the amount to keep is an example input or is worked out from one. The Etsy price and fees use Etsy's published rates. Swap in your own numbers.

Example: pricing one 3D printed planter sold on Etsy
LineExample amountHow it was worked out
Filament$2.00Example: 125 g from a 1kg roll at $15.99
Electricity$0.13Example: a 120 W average draw for 6 hours is 0.72 kWh, at the US average residential rate of 18.31 cents per kWh
Printer wear and parts$1.80Example: 6 hours at $0.30 an hour
Failure allowance$0.39Example: 10% of filament, electricity and wear
Labour$10.00Example: 30 minutes of support removal, cleanup and packing at $20 an hour
Packaging$1.00Example: box and paper fill
Postage$5.00Example: free shipping to the buyer, so postage is a cost
Overhead$1.00Example: software and subscriptions spread across the month's sales
Cost$21.32All the lines above
Profit$4.26Example: 20% of cost
Amount to keep$25.58Cost plus profit
Etsy price$29Amount to keep plus Etsy's fees, rounded up
Etsy fees$3.21Listing, transaction and processing fees on the price

At $29, Etsy's fees come to $3.21, which leaves just over the amount to keep. In this example the filament and the electricity together cost less than the packaging. Labour and postage are the large lines.

How to set a price that covers selling fees

Percentage fees are charged on the price the buyer pays, so adding them as a flat amount on top of cost leaves you short. Work backwards from the amount you want to keep.

  1. Add the fixed fees

    On Etsy these are the listing fee of $0.20 per listing and the flat amount in the processing fee, which for a US seller is 3% + $0.25. Add both flat amounts to the amount you want to keep.

  2. Add the percentage fees

    On Etsy that is the 6.5% transaction fee plus the percentage part of the processing fee. Add the two percentages and write the total as a decimal.

  3. Divide

    Divide the result of the first step by one minus the decimal from the second step. The answer is the lowest price that still leaves you the amount you want to keep.

  4. Round up and check

    Round up to a price you are happy to show, then work the fees out on that price. In the example, a $29 price pays $3.21 in Etsy fees and leaves just over the amount to keep.

How to work out filament cost per print

Take the filament weight from your slicer, not from the finished part. The slicer estimate includes supports, brims, rafts and, on multi-colour printers, the purge waste from each colour change, all of which you paid for. For multi-colour prints the purge adds weight with every colour change, so check the slicer's breakdown before you quote.

Divide the roll price by its weight to get a cost per gram. Example: Bambu Lab lists its PLA Basic at $15.99 for a 1kg roll, or $11.19 a roll when you buy 10 or more, so a gram costs a little under two cents at list price. Use what you pay to restock today, and price speciality materials such as silk, matte, wood-fill, PETG or TPU at their own roll prices.

If you weigh finished parts on a kitchen scale to check the slicer, add the supports and purge you threw away. Over a few prints you will see how close the slicer estimate is.

How much to charge per hour for 3D printing

A machine-hour rate covers what the printer costs you while it runs. Work it out once per printer, then multiply by the print time the slicer reports. It has three parts.

First, electricity. Find your printer's average power draw with a plug-in power meter, or from its manual. Multiply kilowatts by hours, then by your electricity rate. The US average residential price was 18.31 cents per kWh in July 2026, according to the EIA, and your own bill shows your rate. Example: a 120 W average draw costs about 2 cents an hour at that rate.

Second, printer wear. Divide what the printer cost by the print hours you expect from it before replacement. Example: a $219.00 printer spread over 1,000 print hours is about $0.22 an hour.

Third, parts and maintenance: nozzles, build plates, belts, lubricant and the occasional hot end. Example: $0.08 an hour. With electricity, wear and parts, the example machine rate rounds to $0.32 an hour.

The machine rate is a cost, not a price. If you quote print jobs by the hour or by the gram, the number behind that rate should still be your full cost per hour plus labour, failures and profit. A machine rate on its own pays you nothing for your time.

Build failed prints into the price

Some prints fail: a first layer that does not stick, a spaghetti print overnight, a warped corner or a part that snaps when you remove supports. Each failure costs the filament and the machine time again. Keep a simple log for a month: prints started and prints you could sell. The share that failed is your failure rate.

Add that percentage to the filament, electricity and wear lines, as the worked example does with 10%. A design that fails more often than your others deserves its own, higher allowance. If a design fails far more than the rest, fix the design or the settings before you raise its price.

How much to charge for 3D printed items: your time

The printer works unattended, but you do not. Time the work around each print for a week: slicing and setup, clearing the bed, removing supports, sanding, painting, gluing parts, quality checks, photos, the listing, messages and packing. For a simple print this can be a few minutes. For a painted figure or a multi-part model it can be hours.

Choose an hourly wage you would accept for any other job and multiply it by those hours. Spread one-off work across the batch: if you design a product once and sell it many times, divide the design hours across the units you expect to sell. Custom design work for one buyer is different, and those design hours belong on that buyer's quote.

What selling fees take from a 3D print sale

The same $29 planter sold in different places, using each platform's own published rates. Marketplaces charge more per sale and have shoppers searching there; your own store charges less per sale, but you have to find the buyers.

Fees on one $29 3D print sale, US seller Fees on the sale, plus Etsy's listing fee for the one listing sold. Monthly plans are noted next to each amount.
  1. Shopify $1.14 plus Basic plan, $39 a month Card 2.9% + 30¢ $1.14
  2. Square Online $1.26 free plan Card 3.3% + 30¢ $1.26
  3. Etsy baseline $3.21 no monthly plan Listing $0.20, Transaction 6.5% $1.89, Processing 3% + $0.25 $1.12
  4. eBay $4.34 no monthly plan Final value 13.6% $3.94, Per order $0.40
  5. Amazon Handmade $4.35 plan $39.99 a month, then waived once approved Referral 15% $4.35

Assumes a $29 item, free shipping, no tax, a standard US card, no ads and no currency conversion. eBay uses its most-categories rate and assumes the listing is within its 250 free listings a month.

How much to sell 3D prints for: check the market

The formula gives you the lowest price that pays you properly. The market tells you whether buyers will pay it. Search the places you plan to sell for prints like yours, in a similar size, material and finish, and note the prices.

If your price sits among them, list it. If it is well above them, change the product before you cut your wage.

  • Print faster: a larger nozzle, thicker layers or a design that needs no supports cuts machine hours and cleanup time.
  • Print in batches: a full build plate shares one setup and one bed clearing across several parts.
  • Add value buyers can see: personalisation, painting, multi-colour prints or gift-ready packaging.
  • Sell sets: matching pieces share photos, listing time and postage.

Check the licence on any model you did not design before you sell prints of it. Etsy also requires that items made with tools such as a 3D printer are produced based on a seller's original design.

Tax on 3D printing income

Profit from selling prints is taxable income. In the US, the IRS says if you make or buy goods to sell, you can deduct the cost of goods sold from your gross receipts on Schedule C, which is where filament and other materials go. Self-employment tax applies when net earnings are $400 or more, at a rate of 15.3%, so leave room for it in your profit line.

Sales tax rules vary by state and city. This page is general information, not tax advice; check your state's revenue department or a tax professional.

Where Nation fits

Nation

Category: an AI store builder

Publisher

Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. Plans start at $39 a month plus a 2% fee on each sale, with a 14-day trial for $1.

Limits today

  • Status: open: describe what you make in the app onboarding and the store builds itself.
  • Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
  • Shopper marketplace: no shopper marketplace has been announced.
  • Track record: no independent reviews or public stores yet.

Nation publishes this page.

Describe what you make

Questions about pricing 3D prints

How much should I charge for 3D prints?

What to charge for 3D prints depends on your costs: filament by weight, machine hours, a failure allowance, your labour, packaging and overhead, plus a profit margin and the selling fees. Example: a print that costs $21.32 to make, with a 20% profit, needs a price of $29 on Etsy, where fees take $3.21.

How much to charge per hour for 3D printing?

An hourly rate for 3D printing should cover electricity, printer wear and spare parts, plus your labour and profit on top. Electricity is small. Example: at the US average of 18.31 cents per kWh, a printer drawing 120 W costs about 2 cents an hour, while printer wear in this page's example costs about 22 cents an hour.

How do I calculate the filament cost of a 3D print?

To calculate filament cost for a 3D print, take the weight from your slicer, including supports, brim and purge, and multiply it by the cost per gram of the roll. Example: a 1kg roll at $15.99 costs a little under two cents a gram, so 125 g costs about $2.00.

Should I include failed prints in my 3D printing price?

Failed prints belong in the price of 3D printing, because each failure costs the filament and machine time again. Log a month of prints, count the share that failed, and add that percentage to the filament, electricity and wear lines. The worked example on this page uses an allowance of 10%.

Is 3D printing income taxable?

Income from selling 3D prints is taxable in the US. The IRS says if you make or buy goods to sell, you can deduct the cost of goods sold from your gross receipts on Schedule C, and self-employment tax of 15.3% applies when net earnings are $400 or more. Sales tax rules vary by state, and this is general information, not tax advice.

Describe what you make

Nation is an AI store builder. It is open: describe what you make in the app onboarding and the store builds itself. Describe what you make and continue in the app.