Quick answer
A jewelry description should state the metal and its fineness, whether the piece is plated or coated, what each stone is, and whether a stone is mined, lab-grown or simulated. Under the FTC Jewelry Guides, a stone name for a man-made stone must be immediately preceded with equal conspicuousness by the word “laboratory-grown,” “laboratory-created,” “[manufacturer name]-created,” or by the word “imitation” or “simulated,” and gold alloy is described only when a correct designation of the karat fineness of the alloy immediately precedes the word “Gold”. After those facts, add size, weight, finish and care.
Nation, an AI store builder, publishes this page. It is not ranked or compared here. See where Nation fits.
What a jewelry description must state
A jewelry description is the text on a product page that tells a buyer what the piece is made of, how big it is and how to look after it. For jewelry, the material facts come first, because a buyer shopping online cannot test the metal or look at the stone under a loupe. The description is the only evidence they have.
In the US, the Federal Trade Commission's Guides for the Jewelry, Precious Metals, and Pewter Industries (16 CFR Part 23) set out which words are deceptive. They apply to sellers at every level of the trade (including but not limited to manufacturers, suppliers, and retailers), and they cover claims in labeling, advertising, promotional materials, and all other forms of marketing. A product title, a photo caption and a listing tag all count. The guides are the FTC's view rather than a statute, but the FTC may take action under the FTC Act if a marketer or other industry member makes a claim inconsistent with the guides.
The table lists the facts a listing should carry and the part of the guides behind each one.
This page is general information about the FTC guides, not legal advice. State consumer protection and precious metal marking laws can add rules, and they vary by state, so check your own state's rules and the marketplace's policies before you list.
How to describe gold, silver and other metals
A common mistake in metal wording is writing "gold" for anything that looks gold. The FTC guides treat the plain word gold as meaning fine (24 karat) gold. Anything less pure needs its karat.
Gold alloy may be called gold only if a correct designation of the karat fineness of the alloy immediately precedes the word “Gold”, so write "14k gold" rather than "gold". A piece that is gold on the outside only must be adequately qualified to indicate that the product or part is only surface-plated. If you use the term gold plate or gold plated, it should be immediately preceded by a correct designation of the karat fineness of the alloy. Name the base metal too, such as brass or stainless steel, because buyers with metal allergies look for it.
Vermeil has its own definition: a base of sterling silver coated or plated on all significant surfaces with gold, or gold alloy of not less than 10 karat fineness, with gold at least two and one half (2 1/2 ) microns thick. Do not call gold-plated brass vermeil.
For silver, the plain word silver needs an equally conspicuous, accurate quality fineness designation indicating the pure silver content in parts per thousand in front of it. Sterling, solid silver and Ster. mean at least 925/1,000ths pure silver. Silver-plated pieces must be adequately qualified to indicate that the product or part is only coated.
Platinum used alone means 950 parts per thousand pure Platinum. And if a piece described as precious metal has a rhodium finish, as many white gold rings do, the guides say not to leave out a surface-layer application of rhodium.
The karats in the table are example values. Use the actual fineness of your piece, as stated by your supplier or a test.
How to describe stones: mined, lab-grown or simulated
A stone name used on its own, such as ruby, sapphire, emerald or diamond, tells the buyer the item is a mined stone of the type described. If the stone was made in a lab, the name must be immediately preceded with equal conspicuousness by the word “laboratory-grown,” “laboratory-created,” “[manufacturer name]-created,” or a phrase of like meaning. If the stone only looks like the named gem, such as cubic zirconia sold as a diamond look, the name must be preceded by the word “imitation” or “simulated,”.
Two shortcuts sellers use do not work. The FTC says the word faux is not an adequate disclosure that the stone is not a mined stone. And the words real, genuine, natural and precious cannot describe stones that are manufactured or produced artificially.
The unqualified word diamond is for a stone that meets the FTC definition of diamond and is cut with at least seventeen (17) polished facets. A lab-grown diamond still needs lab-grown in front of the word diamond, just as visible. A cubic zirconia is not a diamond of any kind, so write cubic zirconia, or simulated diamond.
Pearls follow the same pattern. A cultured pearl must be described with the word pearl immediately preceded, with equal conspicuousness, by the word “cultured” or “cultivated,”. An imitation pearl must be immediately preceded, with equal conspicuousness, by the word “artificial,” “imitation,” or “simulated,”. Terms like faux pearl or fashion pearl need one of those words in front of them too.
Gemstone treatments and diamond weight
Many gemstones are heated, oiled, filled or dyed. The guides ask sellers to disclose a treatment in three cases: The treatment is not permanent; The treatment creates special care requirements for the gemstone; or The treatment has a significant effect on the stone's value. For online sales the guides add that disclosure should be made in the solicitation for, or description of, the product, so the note belongs on the listing page, not only on a card in the box. When a treatment calls for special care, such as avoiding ultrasonic cleaners, say so in the care section.
For diamond weight, write carats as a decimal. If you give weight in points, it is allowed only if the weight is also stated as decimal parts of a carat. If you use fractions such as one half carat, add a conspicuous disclosure of the fact that the diamond weight is not exact, with the range you use. For a ring with several stones, say whether the weight is the center stone or the total of all stones.
Handmade jewelry description examples and the word handmade
The guides define handmade narrowly. A piece is handmade only if the entire shaping and forming of such product from raw materials and its finishing and decoration were accomplished by hand labor and manually controlled methods. Raw materials here means items such as bulk sheet, strip, wire, precious metal clays, ingots, casting grain that have not yet been formed into parts or blanks, not finished components.
A necklace assembled from bought chain, jump rings and charms is not handmade under that definition. Describe what you did instead: hand-assembled, designed and assembled by hand, or hand-stamped, if the stamping was done by hand. Cast pieces made from a hand-carved wax model can say hand-carved model, cast in sterling silver.
- Example: "Hand-forged sterling silver hoops. Shaped and hammered by hand from sterling silver wire in our studio." Use this only when the whole process is done by hand.
- Example: "Hand-assembled charm necklace. 14k gold-filled chain with a hand-stamped brass disc, gold plated."
- Example: "Designed by hand, cast in sterling silver. Each ring is cast from a wax model carved by hand, then polished."
How to describe jewelry in a product listing, step by step
The order below puts the material facts where buyers and search engines read first, then the details that help a buyer picture the piece.
Write the title as type, metal and stone
Start with the item type, then the metal with its fineness, then the stone with its origin word. Example: "Lab-grown sapphire pendant in 14k white gold".
Open with one sentence on what it is
Say what the piece is and how it is worn, in plain words. Leave style words for later, after the buyer knows the materials.
List materials as a block
Give metal, plating and base metal, each stone with lab-grown, simulated or natural, and any treatment. Put this block above the fold on mobile.
Give exact measurements
State chain length, pendant size, ring size, hoop diameter, stone size in millimetres and carat weight as a decimal. Buyers cannot hold the piece, so numbers replace the try-on.
Add finish, closure and fit
Polished, brushed or hammered finish, clasp type, whether a ring can be resized and whether earrings have posts or hooks.
Add care and packaging
How to clean and store the piece, what to avoid, and how it ships. Include special care for treated stones and for plated metal.
Jewelry description examples and templates
Fill in the brackets with your own facts. The example values are made up to show the format; they do not describe a real store.
- Template, solid gold ring: "[Item] in [karat] [color] gold. [One sentence on design]. Band width [mm], ring size [size], [resizable or not]. Stone: [natural, lab-grown or simulated] [stone], [size] mm, [carat] ct. Care: [care]."
- Example, plated earrings: "Small hoop earrings, 18k gold-plated stainless steel. Hoop diameter 15 mm, hinged closure. The gold layer is plating over a steel base, so avoid perfume and pool water."
- Example, sterling necklace: "Sterling silver bar necklace. 925 sterling silver bar and chain, chain length 18 in with a 2 in extender, spring ring clasp. Polishes with a silver cloth."
- Example, lab-grown diamond: "Lab-grown diamond solitaire ring in 14k white gold, rhodium plated. Center stone 0.50 ct lab-grown diamond, round brilliant. Weight is given as a decimal of a carat."
- Example, simulated stones: "Simulated emerald drop earrings. Green glass stones in a sterling silver setting. The stones are imitation emeralds, not mined gems."
- Example, treated stone: "Natural ruby stud earrings in 14k yellow gold. The rubies are heat treated. Avoid harsh chemicals." State the treatment your supplier reports, and add care notes if it needs special care.
- Example, pearls: "Cultured freshwater pearl strand, 7 to 8 mm pearls, sterling silver clasp. Wipe with a soft cloth after wearing."
Jewelry description words that help and words to avoid
Descriptive words help buyers picture the piece, but they should describe what the photos show, not stand in for the material facts. These jewelry description words are safe when they are true, and the second list collects words the FTC guides restrict.
For diamonds, the guides bar the word flawless for a stone that shows any flaw when examined under a corrected magnifier at 10-power, and bar properly cut or modern cut for a stone that is lopsided, or is so thick or so thin in depth as to detract materially from the brilliance of the stone.
Where Nation fits
Nation
Category: an AI store builder
Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. This page explains jewelry description rules and does not review or rank any store builder.
Limits today
- Status: open: describe what you make in the app onboarding and the store builds itself.
- Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
- Shopper marketplace: no shopper marketplace has been announced.
- Track record: no independent reviews or public stores yet.
Nation publishes this page. The rules on it come from the FTC Jewelry Guides, not from Nation.
Describe what you makeQuestions about jewelry descriptions
What should a jewelry description include?
A jewelry description should include the metal and its fineness, any plating with its base metal, each stone with lab-grown, simulated or natural, and any treatment that needs disclosure. Then add measurements, carat weight as a decimal, finish, closure and care. The FTC Jewelry Guides cover the material words, and they apply to online listings.
How do you describe gold jewelry?
To describe gold jewelry, give the karat right before the word gold, such as 14k gold, because the plain word gold means fine (24 karat) gold. Gold-plated pieces must say they are plated, with the plating karat and the base metal. Gold-filled and vermeil are separate terms with their own definitions.
Can I call cubic zirconia a diamond in a listing?
You cannot call cubic zirconia a diamond in a listing. The FTC Jewelry Guides say an imitation stone's name must be preceded by the word “imitation” or “simulated,” with equal prominence. Write cubic zirconia or simulated diamond. The word faux alone is not enough, because the FTC treats it as not a clear disclosure.
How should a lab-grown diamond be described?
A lab-grown diamond should be described with a word such as lab-grown or laboratory-created placed right before diamond, and just as visible. The FTC Jewelry Guides also say real, genuine and natural cannot describe stones that are manufactured or produced artificially. Carat weight, cut and metal follow the same rules as for mined diamonds.
Can I call my jewelry handmade if I assemble it?
Jewelry you assemble from bought chain and findings is not handmade under the FTC Jewelry Guides. They reserve handmade for pieces where the entire shaping and forming of such product from raw materials and its finishing and decoration were accomplished by hand labor. Describe the work you did instead, such as hand-assembled, hand-stamped or hand-finished, which the guides allow when that step was done by hand.