Quick answer
ASTM F963 is a mandatory consumer product safety standard for children’s toys in the US, and toys must now meet ASTM F963-23. Toys for children 12 years of age or younger must be third-party tested at a CPSC-accepted laboratory and certified in a Children's Product Certificate. Registered small batch makers can skip the lab for the toy standard itself, but small parts and lead in paint still need a CPSC-accepted lab.
Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, and it does not test or certify toys. See where Nation fits.
What ASTM F963 is and why it is mandatory
ASTM F963 is the Standard Consumer Safety Specification for Toy Safety, written by ASTM International. Section 106 of the Consumer Product Safety Improvement Act of 2008 (CPSIA) made it a mandatory consumer product safety standard for children’s toys, and the rule sits in federal regulations at 16 C.F.R. part 1250. The Consumer Product Safety Commission (CPSC) enforces it.
The version that applies today is ASTM F963-23, approved on August 1, 2023. Federal rules state that each toy must comply with all applicable provisions of that version. The same part also adds performance and labeling requirements for water bead toys on top of the standard.
Sections of ASTM F963 that repeat a rule CPSC or the FDA already enforces, such as flammability and cosmetics, are not part of the mandatory requirement. Those hazards are still regulated, but under their own rules. You can read the standard for free, read-only, in ASTM’s electronic Reading Room.
This page is general information, not legal advice. Federal law sets the rules below. Rules can vary by state, and some states add their own requirements for children's products, so check your state as well.
Which products count as toys
ASTM F963 defines a toy as any object designed, manufactured or marketed as a plaything for children under 14 years of age. How you describe and sell the item matters as much as what it is: a crocheted animal listed as a nursery decoration and one listed as a cuddly toy for a toddler can be treated differently.
The definition leaves out several product groups, which have their own rules or none: bicycles and tricycles, playground equipment, kites, sporting goods, musical instruments, furniture, and art materials or craft items whose finished form is not mainly for play. Toy versions of sports gear or furniture are still toys.
Testing and certification apply to a narrower group. The CPSC requires third-party testing and a certificate only for products designed or intended primarily for children 12 years of age or younger. A toy aimed at older children may still have to meet the standard, but the lab and certificate rules do not apply to it.
Toy safety requirements that most handmade toys meet
ASTM F963 covers many kinds of toys, and not every section applies to every product. The maker has to work out which sections apply. The table lists the sections handmade sellers run into most often, as the CPSC summarises them.
Labeling rules are part of the standard, but they do not require compliance assessment by a CPSC-accepted, third-party laboratory. You check them yourself.
Children's products also need a permanent tracking label, and it has to appear on the product AND its packaging.
ASTM F963-23 and the older versions
Which version a toy must meet depends on when it was made, not when it was sold. Toys manufactured after April 20, 2024 must meet ASTM F963-23. Toys made between February 28, 2018 and that date could be certified to ASTM F963-17.
For a maker selling new stock, the practical answer is simple: test and certify to ASTM F963-23. If you have older inventory with an older test report, the date it was made decides whether that report still covers it.
ASTM F963, the CPSIA and toy safety testing
The CPSIA did two things for toys. It made ASTM F963 mandatory, and it requires makers and importers of children's products to prove compliance. In general, children's products must be third-party tested at a CPSC-accepted laboratory and certified as compliant.
The proof is a Children's Product Certificate (CPC), which the maker issues, not the lab. For toys, the CPC cites 16 C.F.R. part 1250 in the form 16 C.F.R. part 1250 – Children’s toys, followed by the ASTM F963 sections that apply to the product. Toys with paint also list the lead-in-paint rule, and toys with small parts list the small parts rule.
A lab tests the sections that need lab work, such as lead in paint, small parts and use-and-abuse tests. Visual checks and labeling checks are done by the maker.
What the small batch rules exempt for handmade toys
The CPSC gives smaller makers some relief from third-party testing through the Small Batch Manufacturers program. To qualify, a business needs gross revenue of $1,436,864 or less in the prior calendar year from all consumer products, and that total includes both children's products and non-children's products. It also needs No more than 7,500 units of the product made in the previous calendar year.
Qualifying is not enough on its own. A business MUST register with the CPSC on SaferProducts.gov, and registration is valid for the current calendar year only. The registry lists the business name, city and state publicly unless you file a written claim of confidentiality within 15 calendar days of registration.
The relief depends on which group a rule falls into. The toy standard itself is in Group B: Children’s toys (ASTM F963) [16 CFR part 1250]. Group A rules get no relief.
Small batch status is not an exemption to any applicable requirements. Every toy still has to meet the standard and carry a CPC. Registered makers provide their registration number in section 7 of the CPC.
In practice, the Group A rules decide whether a registered maker still needs a lab. A painted wooden toy goes to a CPSC-accepted lab for the paint test, and any toy covered by the small parts rule goes there for that test. A toy that no Group A rule covers can be certified to the toy standard with one of the alternatives.
Selling handmade toys: the steps in order
These steps follow the CPSC's guidance for a small maker selling toys for young children in the US.
Decide whether the product is a toy
Check whether it is a plaything for children under 14 years of age and whether it is meant mainly for children 12 years of age or younger. The second test decides whether lab testing and a CPC apply.
List the ASTM F963 sections that apply
Go through the standard, or the CPSC's section guidance, and note each section that fits your toy: materials, small objects, seams, edges, magnets, cords, labels.
Check whether you qualify as a small batch maker
If your revenue is $1,436,864 or less and you made No more than 7,500 units of the toy last year, register before you rely on any relief, and renew each year.
Test what needs a lab
Send Group A items, such as small parts and painted surfaces, to a CPSC-accepted lab. Without small batch registration, the toy standard tests go there too.
Issue a Children's Product Certificate
Write the CPC yourself, cite 16 C.F.R. part 1250 – Children’s toys with the sections that apply, and keep the test records behind it.
Label the toy and its packaging
Add the tracking label on the product AND its packaging, the age grade, any required warnings, and the name and address of the producer or distributor.
Where Nation fits
Nation
Category: an AI store builder
Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. It does not test, certify or label toys, so the steps on this page stay with the maker.
Limits today
- Status: open: describe what you make in the app onboarding and the store builds itself.
- Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
- Shopper marketplace: no shopper marketplace has been announced.
- Track record: no independent reviews or public stores yet.
Nation publishes this page. Nation does not test or certify products, and the rules here come from the CPSC and federal regulations.
Describe what you makeQuestions about ASTM F963 and toy safety
Is ASTM F963 mandatory?
ASTM F963 is mandatory in the US. Section 106 of the Consumer Product Safety Improvement Act of 2008 (CPSIA) made it a mandatory consumer product safety standard for children’s toys, and the rule is codified at 16 C.F.R. part 1250. Toys sold in the US must meet the applicable sections of ASTM F963-23, whether they are made in a factory or by hand at home.
What is ASTM F963-23?
ASTM F963-23 is the current version of the US toy safety standard, approved on August 1, 2023. Toys manufactured after April 20, 2024 must meet it. Older versions still apply to toys made before that date, because the version that applies depends on the date of manufacture, not the date of sale.
Do handmade toys need third-party testing?
Handmade toys for children 12 years of age or younger generally need third-party testing at a CPSC-accepted lab and a Children's Product Certificate. Registered small batch makers can show compliance with the toy standard in other ways, but small parts and lead in paint still need a lab test.
What is the difference between ASTM F963 and the CPSIA?
ASTM F963 is the toy safety standard itself, and the CPSIA is the federal law that made it mandatory. Section 106 of the Consumer Product Safety Improvement Act of 2008 (CPSIA) turned the standard into federal law. The CPSIA also requires testing and a Children's Product Certificate for children's products, including toys.
Who qualifies as a small batch manufacturer?
A small batch manufacturer is a business with $1,436,864 or less in prior-year gross revenue from all consumer products that made No more than 7,500 units of the product in the previous calendar year. The business MUST register with the CPSC to get any relief, and the registration is valid for the current calendar year only.
Where can I get help with toy safety rules?
Toy safety help is free from the CPSC's Small Business Ombudsman, which answers questions from small makers at (888) 531-9070 or through a contact form on the CPSC site. You can read ASTM F963 itself in ASTM’s electronic Reading Room.