Quick answer
USPS cubic pricing charges a parcel by the zone and cubic measurement (Tier) of the mailpiece instead of its weight, for pieces up to 20 pounds or less with no side over 22 inches. Ground Advantage cubic covers parcels of 1 cubic foot or less in 10 tiers, and Priority Mail cubic covers .50 cubic foot or less in five tiers. You get it through commercial label software, and poly mailers are measured by length plus width of the original packaging material.
Nation, an AI store builder, publishes this page. It is not part of any shipping comparison. See where Nation fits.
How USPS cubic pricing works
Most USPS parcel prices depend on weight and zone. Cubic prices drop the weight part: USPS says cubic prices are based on the zone and cubic measurement (Tier) of the mailpiece. A small box full of something heavy pays the price of its size tier, so a dense parcel can cost much less than its weight price.
Cubic exists for two services. USPS Ground Advantage cubic is the slower, cheaper one and allows larger parcels. Priority Mail cubic is faster and stops at a smaller size. The table sets the rules side by side, as the Domestic Mail Manual (DMM) states them.
Each tier is a band of volume measured in cubic feet. Tier 0.10 covers anything up to a tenth of a cubic foot, and the DMM describes tier 0.20 as 0.101 to 0.20 cubic feet, and so on up the scale. The price for each tier then changes with the zone the parcel goes to.
Who can get USPS cubic prices
Cubic prices are commercial prices, available only through the payment methods the DMM lists. For Ground Advantage, those are Registered end-users of USPS-approved PC Postage products, USPS-approved IBI postage meters, Permit imprint, and USPS Returns service used by permit holders. For Priority Mail cubic, the DMM names Registered end-users of USPS-approved PC Postage products and permit imprint customers.
For a small shop, the practical route is label software that is an approved PC Postage product. You register an account, enter the parcel's dimensions and weight, and the software shows the cubic price when the parcel qualifies. Some tools compare both prices for you: Pirate Ship, for example, says it automatically rate shops between Weight-Based and Cubic rates for Ground Advantage. For Priority Mail it lists three rate structures: Weight-Based, Dimension-Based Cubic, and Flat Rate.
Permit imprint mailers can also use Priority Mail cubic, with extra conditions. One of them is that mailings must contain at least 200 pieces or 50 pounds of mail.
USPS cubic calculator: how to work out the tier of a box
The DMM gives one method for rectangular and nonrectangular parcels. Example: a box measuring 8 by 8 by 8 inches holding 10 pounds of tile samples.
Measure each side at its widest point
Measure the length, width and height in inches at each dimension’s maximum point, so any bulge counts.
Round each side down
Each measurement is rounded down to the nearest 1/4 inch. The DMM's own example: a side of 12-3/8 inches, it is rounded down to 12-1/4 inches. Rounding down is in your favour. Dimensional weight works the other way: there each side is rounded up to the nearest whole inch.
Multiply and divide
Multiply length by width by height, then divide by 1,728, the number of cubic inches in a cubic foot. In the example, 8 by 8 by 8 inches is 512 cubic inches, which is 0.296 cubic feet.
Find the tier
Round the result up to the next tier. The example box is 0.296 cubic feet, so it falls in tier 0.30. A box at 0.31 would move to tier 0.40, which is why a quarter inch of box size can change the price.
Check the limits
Confirm the parcel weighs 20 pounds or less and its longest side is no more than 22 inches. If it fails either check, it pays the normal weight price.
The soft pack calculation for poly mailers and padded envelopes
Flat mailers have no real height, so USPS measures them differently. For soft packs, meaning poly, plastic, cloth, or similar soft packaging, and for padded envelopes, the tier comes from length plus width of the original packaging material. You measure the mailer itself, flat, before you fill it, not the shape it takes once packed.
Measure the length and width separately, round each one down to the nearest quarter inch, and add them. The DMM's example: 10-1/8 inches is rounded down to 10 inches. The total of length plus width must not exceed 36 inches. Expandable or pleated mailers do not use this method: they must meet the measurement guidelines in 1.3.3, the box method above.
Example: a 10 by 13 inch poly mailer adds up to 23 inches, so it is tier 0.20 whatever you pack in it, up to the weight limit. Soft packs stop at tier 0.50, so a soft pack never reaches the larger Ground Advantage tiers.
USPS cubic shipping prices by tier
These are the published commercial cubic prices in Notice 123, effective July 12, 2026, for two sample zones: zone 5 and zone 8. Your label software shows the price for your own zone.
Ground Advantage cubic also has tiers 0.60 to 0.80, left out here for space. Priority Mail cubic ends at tier 0.50.
When cubic beats the weight price, and when it does not
Cubic helps when a parcel is heavy for its size. It does nothing for a light parcel in a big box, because that parcel already pays a low weight price. Label software that compares both prices picks the cheaper one, but it helps to know which way your products lean before you choose packaging.
- Example, dense box: the 8 inch box with 10 pounds of tile samples is tier 0.30. Ground Advantage cubic is $10.96 to zone 5 and $14.67 to zone 8. The commercial weight price for 10 pounds is $16.76 and $25.34.
- Example, heavy poly mailer: a 10 by 13 inch mailer with 3 pounds of clothing is tier 0.20. Ground Advantage cubic is $9.37 to zone 5 and $11.84 to zone 8, against weight prices of $11.57 and $15.75.
- Example, light large box: a 1 pound pillow in a 12 by 12 by 10 inch box is tier 0.90. Cubic is $16.01 to zone 5, while the 1 pound weight price is $8.74. Here the weight price wins.
Cubic applies only to parcels of 1 cubic foot or less. For a Ground Advantage commercial parcel exceeding 1 cubic foot (1,728 cubic inches), postage is based on the actual weight or the dimensional weight, whichever is greater.
How to pack for a lower cubic tier
Because cubic charges by size band, packaging choices move the price more than the product does. A few checks keep parcels in the lowest tier they can reach.
- Pick boxes that land just under a tier line, not just over it. Work out the tier of each box size you stock once, with the steps above.
- Use a flat poly mailer for soft goods. Its tier depends only on its flat length plus width, so a full mailer and a half-empty one pay the same.
- Avoid pleated or expandable mailers if you want the soft pack method. Those are measured with the box method instead.
- Enter accurate dimensions in your label software. The cubic tier is worked out from them, so a wrong measurement gives a wrong price.
- Keep each parcel at 20 pounds or less and no side over 22 inches. A parcel outside those limits pays the weight price.
Where Nation fits
Nation
Category: an AI store builder
Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. This page covers USPS cubic prices, which Nation does not set or sell.
Limits today
- Status: open: describe what you make in the app onboarding and the store builds itself.
- Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
- Shopper marketplace: no shopper marketplace has been announced.
- Track record: no independent reviews or public stores yet.
Nation publishes this page. Nation does not sell postage and is not part of any shipping price shown here.
Describe what you makeQuestions about USPS cubic pricing
What is USPS cubic pricing?
USPS cubic pricing is a commercial price that depends on the zone and cubic measurement (Tier) of the mailpiece instead of its weight. It applies to parcels up to 20 pounds or less with no side over 22 inches. Ground Advantage cubic goes up to 1 cubic foot or less, and Priority Mail cubic goes up to .50 cubic foot or less.
How do I get USPS cubic rates?
USPS cubic rates are commercial prices, sold only through the payment methods the Domestic Mail Manual lists. For a small shop that usually means being one of the Registered end-users of USPS-approved PC Postage products, which is label software approved by USPS. You enter each parcel's dimensions and weight, and the software applies the cubic price when the parcel qualifies.
How is the USPS cubic tier calculated for a box?
The USPS cubic tier for a box comes from its volume. Measure length, width and height, with each side rounded down to the nearest 1/4 inch. Multiply the three, divide by 1,728, and round up to the next tier. A box measuring 0.296 cubic feet, for example, is priced at tier 0.30.
How does USPS cubic pricing work for poly mailers?
USPS cubic pricing for poly mailers and padded envelopes uses length plus width of the original packaging material, not volume. Add the flat length and width, each rounded down to the nearest quarter inch. The total must not exceed 36 inches. A total from 0" up to 21" is tier 0.10, and more than 21" up to 27" is tier 0.20.
Is USPS cubic shipping always cheaper?
USPS cubic shipping is cheaper only for parcels that are heavy for their size. A small box with several pounds inside often costs less at the cubic price. A light item in a large box usually costs less at the weight price. Label software that compares both prices picks the lower one for each label.