Skip to the answer

How to start a permanent jewelry business: steps, rules and costs

By Nation 11 min read

Quick answer

To start a permanent jewelry business, learn to weld on a small jewelry welder, buy chain whose metal you can describe accurately, register the business and get the seller's permit and local licenses your state and city require, then sell at pop-ups, salons and private parties. Under the FTC Jewelry Guides, sterling silver must be at least 925/1,000ths pure silver, and gold-filled chain needs a gold layer making up at least 1/20th of the weight of the metal in the entire article. One welder maker lists a starter kit with welder, chain and argon at $2,399, and the card fee on an example $60 bracelet is $1.71 on Square's free plan.

Nation, an AI store builder, publishes this page. It is not in the fee comparison. See where Nation fits.

How to start a permanent jewelry business, step by step

Permanent jewelry is a chain bracelet, anklet, necklace or ring closed around the customer with a small weld instead of a clasp. The business sells the chain and the fitting in one visit, usually face to face. These are the first steps, in a workable order.

  1. Learn the weld before you buy stock

    Practice on scrap chain until every jump ring closes cleanly and the weld holds when you pull on it. Follow the welder maker's instructions for eye protection and the argon shielding gas, and practice on a friend before a paying customer.

  2. Choose your metals

    Common choices are solid karat gold, gold-filled and sterling silver. Each of those words has a meaning under the FTC Jewelry Guides, covered below, so buy from suppliers who state the metal content in writing.

  3. Register the business

    Pick a structure, such as a sole proprietorship or an LLC, and register a business name if you trade under one. An EIN is a federal tax ID number for businesses, tax-exempt organizations and other entities, and you can get one for free directly from the IRS in minutes.

  4. Get a seller's permit and local licenses

    Ask your state tax agency whether you need a seller's permit before your first event; the permits section below shows how California and New York treat sellers at events. License requirements and fees vary based on your business activities, location, and government rules. Check your city and the rules of each event you join too.

  5. Set your prices

    Price by the piece or by the inch, with a tier for each metal. Build each price from the chain and jump ring, your time at the table, the card fee and a share of the welder, argon and event costs.

  6. Pick a card reader and a booking page

    Plan to take card payments at events. Choose a reader that can keep taking payments when an event has weak signal, and a booking page for parties that takes a deposit.

  7. Book your first events

    Start where customers already gather: markets, salons, boutiques and private parties. Photograph each finished piece, with the customer's permission, for your social accounts.

What you need to start permanent jewelry

The kit is portable, so you can carry it to events. Chain is the stock you keep buying.

  • A permanent jewelry welder, with its grounding clip and electrode.
  • Argon gas and a regulator, if your welder uses shielding gas.
  • Eye protection rated for the welder, for you and for anyone watching closely.
  • Chain by the foot in each metal you sell, and jump rings to match.
  • Flush cutters, two pairs of flat-nose pliers and a measuring tape.
  • A display for chain and charms, a mirror, a light and a table cover.
  • A card reader, a phone or tablet, and printed aftercare notes for customers.

What you can call your chain: FTC metal rules

The Federal Trade Commission's Jewelry Guides describe when words like sterling, karat gold and gold-filled can be used without misleading buyers in the US. A permanent jewelry seller uses these words on price boards, booking pages and social posts, so each one has to match the chain on the spool.

FTC Jewelry Guides terms for common permanent jewelry metals
Term on your price boardWhen the FTC Jewelry Guides allow it
Sterling silverThe metal is at least 925/1,000ths pure silver.
Karat gold, such as 14KFor gold alloy below 24 karat, a correct designation of the karat fineness must immediately precede the word gold.
Gold, with no karat markOnly for fine (24 karat) gold.
Gold-filledA mechanically bonded layer of gold alloy of not less than 10 karat fineness, making up at least 1/20th of the weight of the metal in the entire article.
Gold-platedThe word gold must be adequately qualified to indicate that the product or part is only surface-plated.
VermeilMust have a base of sterling silver coated or plated on all significant surfaces with gold, or gold alloy of not less than 10 karat fineness, at a minimum thickness equivalent to two and one half (2 1⁄2) microns of fine gold.

If a supplier cannot state the metal content in writing, do not use these terms for that chain.

Welding chains on children: CPSC rules

Permanent jewelry parties can include children. The Consumer Product Safety Commission treats a consumer product designed or intended primarily for children 12 years of age or younger as a children's product, and children's products carry their own rules.

The CPSC bans children's products with more than 100 ppm of lead in an accessible component. Children's products subject to a CPSC safety rule need third-party testing and certification. The law requires manufacturers and importers of children’s products to certify compliance, usually in a written certificate based on test results from a third-party, CPSC-accepted laboratory.

The CPSC has also determined that certain materials are exempt from testing for total lead content. Its rule says gold (at least 10 karat) and sterling silver (at least 925/1000) do not exceed the lead limits, provided that no lead or lead-containing metal is intentionally added. The rule does not cover base metals in electroplate, clad, or fill applications, so gold-filled or gold-plated chain with a base metal core falls outside it. Even for exempt materials, firms are still expected to certify compliance with the lead limit in a Children’s Product Certificate (CPC).

Before you weld pieces for children, ask your chain and jump ring supplier for the metal content in writing and for any lead test reports, and keep copies. If you are unsure whether welding a piece at your table makes you the manufacturer, the CPSC directs business questions to the Small Business Ombudsman (SBO) team. Until you have an answer and the paperwork, offer permanent jewelry to adults only.

Permits and sales tax for a permanent jewelry business

Business licenses and permits come from your state, county and city. License requirements and fees vary based on your business activities, location, and government rules, and local governments determine registration, licensing, and permitting requirements. This section is general information, not legal or tax advice. Rules vary by state and by city, so check the rules where you live and where each event takes place.

California shows why the welding itself can matter for tax. Its tax agency, the CDTFA, says that for a ring made for a specific customer, the total amount you charge for the ring, including the charge for labor, would be taxable. It also says labor charges to install or apply property which has been sold is not ordinarily subject to sales tax, and that the labor charge should be stated separately on the bill. A welded bracelet could be read either way, so ask your state tax agency how to treat the welding charge before you print a price board.

Registering online for a California seller's permit is free. The CDTFA says you are required to have a permit if you are selling, even temporarily, new or handcrafted items. Sellers with no permanent location can hold a temporary permit, which covers a selling period of 90 days or less at one location, and getting one is easy and free. If you already hold a permit for a permanent place of business, you must register for a sub-permit for each of your temporary locations.

In New York, a seller at a craft show, antique show, flea market or sporting event must apply for a regular Certificate of Authority. If you expect to make taxable sales there, you must register at least 20 days before you begin business. Other states set their own rules through their own tax agencies.

Startup costs for a permanent jewelry business

The welder, bought alone or in a starter kit, is the largest cost in the table. Government filings can cost little or nothing. Each figure below comes from an official or company page, and the last row is for costs you price yourself.

Startup costs, with the source of each figure
ItemCostWhere the figure comes from
Permanent jewelry welder alone$1,249.00Sunstone's listed price for its entry welder, as one maker's example
Starter kit with welder, chain, jump rings and argon$2,399Sunstone's entry starter kit, with 21 ft of chain, as one maker's example
Registering the business with your stateless than $300 in most casesSBA; fees vary by state and business structure
EINfreeIRS, applying directly
California seller's permitfreeCDTFA online registration
Square card reader$59Square hardware page
PayPal card reader$29 for your first card readerPayPal fees page
Shopify Basic plan, billed monthly$39 a monthShopify pricing page; in-person selling is included with every Shopify paid plan
Business license, insurance, display and mirrorVariesYour city, your insurer and your own choices

Sunstone's prices appear here as one maker's published prices, not a recommendation. Compare welders, chain suppliers and training before you buy.

Card fees on one bracelet at a pop-up

If you take cards at the table, the same $60 bracelet costs a different amount to accept on each card reader. The figures use each provider's own published in-person rate.

Card fee on one $60 in-person card sale In-person card rates only. Monthly plans are noted next to each amount.
  1. PayPal point of sale $1.46 no monthly or setup fees Card present 2.29% + $0.09 $1.46
  2. Shopify POS $1.66 Basic plan $39 a month In person 2.6% + 10¢ $1.66
  3. Square baseline $1.71 no monthly fee on Square Free In person 2.6% + 15¢ $1.71

Example: a $60 bracelet paid with a tapped or inserted US card, with no tip, tax, refund or manual card entry.

Where permanent jewelry businesses sell

Permanent jewelry is fitted in person, so most sales happen wherever you can set up a table, a welder and a mirror. Online channels bring bookings and can sell finished pieces that do not need a weld.

  • Markets and pop-ups. In California, you are required to provide specific information to the operator of the event.
  • Salons, boutiques and coffee shops. A recurring day at the same shop gives customers a date to come back; agree the split of sales in writing.
  • Private parties. Bridal, birthday and team events, booked ahead with a deposit.
  • A studio or a booth of your own, once demand is steady enough to cover rent.
  • Your own website, with a booking page, an events calendar and gift cards.
  • Etsy, for finished chains and charms. Etsy's creativity standards give using jewelry-making tools to attach charms to a necklace chain as an example of hand assembled work. Etsy charges $0.20 per listing, a 6.5% transaction fee and US payment processing of 3% + $0.25 per order.

Square says its hardware can process payments securely, even offline, which matters at outdoor events. Offline payments are processed automatically when you reconnect your device to the internet, and are declined if you do not reconnect within 24 hours of taking your first offline payment.

Where Nation fits

Nation

Category: an AI store builder

Publisher

Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. Plans start at $39 a month plus a 2% fee on each sale, with a 14-day trial for $1.

Limits today

  • Status: open: describe what you make in the app onboarding and the store builds itself.
  • Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
  • Shopper marketplace: no shopper marketplace has been announced.
  • Track record: no independent reviews or public stores yet.

Nation publishes this page.

Describe what you make

Questions about starting a permanent jewelry business

How much does it cost to start a permanent jewelry business?

The cost to start a permanent jewelry business depends mostly on the welder and the first chain order. As one maker's example, Sunstone lists its entry welder at $1,249.00 and a starter kit with chain, jump rings and argon at $2,399. An EIN is free from the IRS, and the SBA puts state registration at less than $300 in most cases.

Do you need a license to do permanent jewelry?

A permanent jewelry business usually needs the same registrations as other retail sellers: a seller's permit where the state taxes jewelry, and any business license your city or county requires. License requirements and fees vary based on your business activities, location, and government rules. This is general information, not legal advice, so check with your state and city before your first event.

Can you put permanent jewelry on children?

Permanent jewelry for children counts as a children's product when it is designed or intended primarily for children 12 years of age or younger, and the CPSC bans children's products with more than 100 ppm of lead in an accessible component. A CPSC rule treats gold (at least 10 karat) and sterling silver (at least 925/1000) as within the limit. For gold-filled or plated chain, get test reports.

What metal is best for permanent jewelry?

Permanent jewelry sellers commonly use solid karat gold, gold-filled chain and sterling silver, and the FTC Jewelry Guides describe each one. Sterling silver must be at least 925/1,000ths pure silver. Gold-filled chain needs a gold layer of not less than 10 karat fineness making up at least 1/20th of the weight of the metal in the entire article.

Do you charge sales tax on permanent jewelry?

Sales tax on permanent jewelry depends on the state: in California, the CDTFA says for a ring made for a specific customer, the total amount you charge for the ring, including the charge for labor, would be taxable, while labor charges to install or apply property which has been sold is not ordinarily subject to sales tax. Ask your state tax agency. This is general information, not tax advice.

Describe what you make

Nation is an AI store builder. It is open: describe what you make in the app onboarding and the store builds itself. Describe what you make and continue in the app.