Skip to the answer

Sublimation business: how to start one, from printer to first sale

By Nation 10 min read

Quick answer

A sublimation business prints designs onto polyester fabric or polymer-coated blanks such as tumblers and mugs, using a sublimation printer, sublimation ink and a heat press. You price each item from the blank, ink, transfer paper and packing, plus platform fees: on an example $30 order those are $1.29 on Square Online's free plan, $3.30 on Etsy and $4.48 on eBay. Items for children 12 years of age or younger also fall under the CPSC's children's product rules.

Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, so it is not in the fee comparison. See where Nation fits.

How to start a sublimation business

A sublimation business needs a product line, the equipment to print it, blanks that take sublimation ink, a cost per item you have measured, a registered business and a place to sell. These are the steps in order.

  1. Pick a product line

    Choose a narrow line: tumblers, mugs, polyester shirts, mouse pads, keychains or ornaments. A narrow line needs fewer blank types and one heat press setup.

  2. Choose the printer and press

    Decide between a printer built for sublimation and a converted inkjet, and pick a press that fits your blanks: a flat press for shirts and panels, a tumbler press or convection oven for drinkware. The printer section below lists what to compare.

  3. Source sublimation blanks

    Buy blanks sold for sublimation: white or light polyester fabric, or hard goods with a polymer coating. Plain cotton and uncoated steel do not hold the ink.

  4. Measure the cost of one item

    Add the blank, ink, paper, tape, wrap and packaging, then the share of misprints. The cost section below shows the sum.

  5. Register the business

    Get the licences and permits your state, county and city require, and a seller's permit if your state needs one. The SBA says the licenses and permits you need from the state, county or city depend on your business activities and location.

  6. Check product rules and designs

    Use only artwork you made or licensed, and check the children's product rules before you sell anything aimed at children 12 years of age or younger.

  7. List a few designs and launch

    Photograph real pressed items, list a small set of designs, and add sizes or colours only for the items that sell.

Sublimation equipment: what you need to start

A home sublimation business runs on four pieces of equipment and a few supplies. The printer puts the design on transfer paper with sublimation ink. Heat and pressure then turn the ink into a gas that bonds with polyester or a polymer coating, so the design becomes part of the surface rather than a layer on top.

Equipment and supplies for a sublimation business
ItemWhat it doesNotes
Sublimation printerPrints the mirrored design on transfer paperA dedicated model or a converted inkjet; see the printer section
Sublimation inkTurns to gas under heat and bonds with polyesterUse the ink the printer maker lists for that model
Sublimation paperCarries the ink to the blankCoated paper that releases the ink when heated
Heat pressApplies heat and pressureFlat press for fabric and panels; tumbler press or oven for drinkware
Heat-resistant tape and butcher paperHolds the transfer and protects the pressTape stops the design moving; paper catches ink that passes through
Shrink wrap sleevesHold the paper tight on tumblers in an ovenNeeded only for oven pressing

Choosing a sublimation printer: dedicated or converted

There are two ways to get a sublimation printer. A dedicated sublimation printer is sold by its maker for sublimation, with its own ink and warranty. A converted inkjet is a regular desktop inkjet that has never had standard ink in it, filled with third-party sublimation ink. Before you convert one, read the printer maker's warranty terms on third-party ink.

This page does not rank printers. Compare the models you are looking at on the points below, using each maker's own spec page. Two dedicated desktop models show how far the specs can differ. Epson lists the SureColor F170 at $399.00 with a warranty of Standard 1-year unit exchange, a 4-color (C, M, Y, K) bottle ink system and a maximum paper size of 8.5" x 47.2". Sawgrass gives its SG500 a warranty of 3 years or 100,000 prints and a print size up to 8.5˝ x 14˝, or 8.5″ x 51″ with bypass tray; its SG1000 takes up to A3/Tabloid size paper.

  • Warranty: check whether the printer maker supports sublimation use, how long the cover lasts, and whether it ends at a print count.
  • Ink system: refillable bottles, cartridges or bags, and whether the maker sells the sublimation ink itself.
  • Print width and length: the widest and longest sheet the printer takes sets the largest single transfer, which matters for full tumbler wraps and shirt fronts.
  • Blanks it is made for: Sawgrass describes its system as sublimation for polyester and coated surfaces. No sublimation printer makes the ink hold on cotton or uncoated surfaces.
  • Colour profile and software: a maker-supplied profile saves time matching screen colours to pressed colours.
  • Running cost: the price of a full ink set and how many prints it covers, from the maker's own figures.

Sublimation blanks: what the ink will and will not print on

Sublimation ink bonds only with polyester and with polymer coatings. On fabric, a higher polyester share gives brighter, longer-lasting colour, and white or light fabric shows the design best. On hard goods, the coating does the work: a mug, tumbler or metal panel must be sold as a sublimation blank.

Cotton, uncoated metal, glass and wood do not take the ink on their own. Sellers who want those use a sublimation coating, a polyester-blend top layer, or a different method such as heat transfer vinyl or direct-to-film.

How to start a tumbler business with sublimation

A tumbler business is a sublimation business built around drinkware. The blanks are stainless steel tumblers with a white polymer coating, sold as sublimation tumblers. You print a full wrap, tape or shrink-wrap it to the tumbler and press it in a tumbler press or a convection oven.

Buy blanks in the size you plan to sell most, and keep the same model for a while: each size and taper needs its own template and press time. Test every new batch of blanks before you list it, because coatings can differ between suppliers.

Tumblers carry drinks, so the lid, straw and inner wall touch food. Ask the blank supplier what the inside surface and lid are made of and what food-contact statements they can give in writing. For how lead and food-contact rules work on drinkware surfaces, see the guides at /guides/food-safe-glaze and /guides/food-safe-epoxy.

How to work out the cost of one sublimated item

Price each product from its full cost, not the blank alone. Add the items below for one finished piece, then add your time and a margin.

  1. Blank: the price of one blank, including the shipping you paid on the case.
  2. Ink: divide the price of an ink set by the number of prints of this size it covers.
  3. Paper and supplies: one sheet of sublimation paper, tape, butcher paper and any shrink wrap.
  4. Misprints: if one in twenty pieces fails, add a twentieth of the blank cost to each one.
  5. Packing: box, padding and label.
  6. Platform fees: the fee on each sale, from the table below.

Example: a tumbler blank at $6, ink at $0.40, paper and tape at $0.30, misprints at $0.30 and packing at $1.50 cost $8.50 before fees and postage. These are example inputs, not quoted prices.

Where to sell sublimation products and what each platform takes

Example: one $30 order of a sublimated tumbler sold online. A marketplace shows your listing to its own shoppers; on your own store you bring the buyers yourself.

Fees on one $30 sublimation order, US seller Fees on the sale, plus Etsy's listing fee for the one listing sold. Monthly plans are noted next to each amount.
  1. Shopify $1.17 plus $39 a month on Basic Card 2.9% + 30¢ $1.17
  2. Square Online $1.29 free plan Card 3.3% + 30¢ $1.29
  3. Etsy baseline $3.30 no monthly plan Listing $0.20, Transaction 6.5% $1.95, Processing 3% + $0.25 $1.15
  4. eBay $4.48 no monthly plan Final value 13.6% $4.08, Per order $0.40

Assumes a $30 order, free shipping, no tax, a standard US card, no ads and no currency conversion. Shopify uses its Basic plan and Square its free plan. eBay uses its most-categories rate with no Store and assumes the listing is within its 250 free listings a month.

CPSIA rules for sublimated kids items

Shirts, bags, bibs and cups made for children fall under the Consumer Product Safety Improvement Act (CPSIA), which amended the Consumer Product Safety Act in 2008. A children's product is one designed or intended primarily for children 12 years of age or younger. A sublimated shirt with a cartoon print in toddler sizes is an example of a product made for children.

Children's products must meet the children's product safety rules that apply to them and be tested for compliance by a CPSC-accepted accredited laboratory, unless subject to an exception. They also need a written Children's Product Certificate that provides evidence of the product's compliance, and permanent tracking information affixed to the product and its packaging where practicable. Lead in any accessible component is limited to 100 ppm, and that can include the blank, a coating or metal parts such as zippers. Ask your blank supplier for test reports before you list a kids item.

Rules vary by product and can change, and states and cities can add their own. This page is general information, not legal advice; check the CPSC's business pages at cpsc.gov for your product.

Designs, trademarks and business licences

Sublimation makes it easy to print any image, which is where most sellers get into trouble. Team logos, cartoon characters, brand names and song lyrics belong to someone else. Print only artwork you made, commissioned or licensed for commercial use, and search the USPTO trademark database before you use a phrase as a product name.

For the business itself, the SBA notes that zoning ordinances can still apply even to home-based businesses, and that income, sales, property and corporate taxes can vary significantly from place to place. Licence, permit and tax rules vary by state and city; this page is general information, not legal or tax advice.

Where Nation fits

Nation

Category: an AI store builder

Publisher

Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. Because pricing is from $39 a month plus a 2% fee per sale, with a 14-day trial for $1, it is not in the fee comparison.

Limits today

  • Status: open: describe what you make in the app onboarding and the store builds itself.
  • Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
  • Shopper marketplace: no shopper marketplace has been announced.
  • Track record: no independent reviews or public stores yet.

Nation publishes this page. Nation is not in the fee comparison until signup is public and pricing is published.

Describe what you make

Questions about starting a sublimation business

How do I start a sublimation business?

To start a sublimation business, pick a narrow product line, buy a sublimation printer, ink, paper and a heat press, and source blanks made for sublimation. Measure the full cost of one item, register the business where you live, and list a few designs on a marketplace or your own store.

How do I start a tumbler business?

To start a tumbler business, buy polymer-coated sublimation tumblers in one or two sizes, a sublimation printer and a tumbler press or convection oven. Test each batch of blanks, ask suppliers for written food-contact statements on lids and inner walls, and price each tumbler from blank, ink, paper, packing and fees.

Is a sublimation business profitable?

A sublimation business can be profitable when each price covers the blank, ink, paper, misprints, packing, postage and platform fees, plus your time. On an example $30 order, platform fees alone are $3.30 on Etsy and $1.29 on Square Online, so work out the full cost before you set prices.

Can you sublimate on cotton shirts?

Sublimation ink does not bond with cotton, so a cotton shirt will not hold a sublimated design for long. Sublimation works on polyester fabric and on polymer-coated blanks, and lighter fabric shows the design best. For cotton, sellers use a sublimation coating, a polyester top layer, heat transfer vinyl or direct-to-film transfers.

Do sublimated kids shirts need testing?

Sublimated kids shirts are children's products if they are made mainly for children 12 years of age or younger, so they must be tested for compliance by a CPSC-accepted accredited laboratory, unless subject to an exception and carry a Children's Product Certificate. The total lead limit is 100 ppm. Rules vary by product, so check the CPSC's business pages; this is general information.

Describe what you make

Nation is an AI store builder. It is open: describe what you make in the app onboarding and the store builds itself: leave a description of what you make and your email to join the waitlist.