Skip to the answer

How to find cut and sew manufacturers for your clothing brand

By Nation 10 min read

Quick answer

Cut and sew manufacturers make garments from your own pattern and fabric, so start with a tech pack and a shortlist from directories, trade shows, fabric suppliers and US import records. Check each factory with a paid sample round, references and the FTC's RN database before you place a bulk order. For imported clothing, price the landed cost with the duty rate from the US tariff schedule, and if you sell children's clothing you must issue a Children’s Product Certificate (CPC).

Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, and it does not make clothing or rank factories. See where Nation fits.

What cut and sew manufacturers do, and the other options

A cut and sew manufacturer takes your pattern, cuts the fabric and sews the garment from scratch. You choose the fabric, the fit, the trims and the labels. This gives you a product nobody else sells, and it is also the route with the most steps: patterns, grading, samples and a bulk order.

Many new clothing brands start one level down. A decorator prints or embroiders on blank garments that a mill already made. A full package manufacturer handles everything from sourcing fabric to packing, at a higher unit price. Before you look for a factory, decide which of these you need, because each one is found and vetted differently.

Types of clothing manufacturer
TypeWhat they doWhat you supplyFits
Cut and sew (CMT)Cut, make and trim from your patternTech pack, pattern, often fabric and trimsOriginal garments, own fit
Full packageSource fabric and trims, make, packTech pack or a reference sampleBrands without a sourcing team
Private labelPut your label on their existing stylesLabel, colour choiceFast start, little design control
Blank decorationPrint or embroider on ready-made blanksArtworkGraphic tees, hoodies, merch

Domestic or overseas clothing manufacturers

A factory in the United States is easier to visit, ships to you in days and has no import duty. Unit prices are usually higher, and fewer US factories do every category, so you may need a different shop for knits, denim and outerwear.

An overseas factory is often cheaper per unit and can do more processes under one roof. You pay for that in freight, duty, longer lead times and harder quality checks. Each sample round takes longer when it has to cross an ocean. The table sets out the trade-offs without prices, because these depend on the garment and the order size.

Domestic and overseas production compared
FactorUS factoryOverseas factory
Unit priceUsually higherUsually lower
Import dutyNoneYes, by tariff code and country
Sample turnaroundShort, can visit in personLonger, by courier
Minimum orderSome small shops take low minimumsOften higher per style and colour
Customs paperworkNoneEntry, duty payment, often a customs broker
Country of originRequired on the labelRequired on the label

How to find a clothing manufacturer for your brand

Work through these in order. Each step narrows the list before you spend money on samples.

  1. Decide the garment and the route

    Pick one or two styles to launch and choose cut and sew, full package, private label or decoration. A factory that is good at jersey tees may not sew woven shirts or outerwear.

  2. Prepare a tech pack

    Factories quote from a tech pack: flat sketches, measurements, fabric, trims, stitching and label placement. Without one, quotes are guesses and samples drift from what you meant.

  3. Build a long list

    Search sourcing directories and trade show exhibitor lists, ask fabric and trim suppliers which factories buy from them, and look at US import records to see which factories ship to brands like yours.

  4. Send the same request to every factory

    Send the tech pack, target quantity per style and colour, target price and launch date. Ask for the minimum order, sample cost, sample lead time, bulk lead time and payment terms.

  5. Shortlist three and pay for samples

    Compare the answers side by side, drop any factory that will not put terms in writing, and order a paid sample from the best two or three.

Minimums and sampling rounds

The minimum order quantity (MOQ) is the smallest run a factory will make. Ask how it is counted: per style, per colour, per fabric, or across the whole order. A factory may quote a low minimum per style but require a fabric minimum that is far higher, because the mill sells fabric by the roll.

Plan for more than one sample round. A typical sequence is a first prototype, a fit sample after corrections, a size set across your size range, and a pre-production sample in the bulk fabric. Approve the pre-production sample in writing and keep one, so you can compare the bulk order against it when it arrives.

  • Ask whether sample costs are credited against the bulk order.
  • Ask who pays for remakes if the sample does not match the tech pack.
  • Ask for the bulk lead time from the date you approve the pre-production sample, not from the deposit.
  • Ask whether the factory sews in your labels, including fiber content, country of origin and your name or RN.

How to check a clothing factory before you order

A sample shows what a factory can do once. These checks show who you are dealing with.

  1. Look up the RN

    An RN is a number issued by the FTC to U.S. businesses that manufacture, import, distribute, or sell products covered by the Textile, Wool, and Fur Acts. The FTC's RN Search screen lets you search by entering a key word from a company's name, so you can check whether the US brand or importer a factory names as a client holds an RN. RNs are available only to businesses residing in the United States, so an overseas factory will not have one; its US importer or agent may.

  2. Read import records

    Under CBP's rules, accredited press and trade publications are permitted to examine vessel manifests and publish the data, while an importer may request confidential treatment of its name and address contained in inward manifests. Trade-data services sell these records, which can show which overseas shippers send goods to which US importers. A brand that asked for confidentiality will not appear.

  3. Ask for references

    Ask for two brands of a similar size that the factory has produced for in the last year, and call them. Ask about delays, quality and how problems were fixed.

  4. Put terms in writing

    Get a written order with quantity per size and colour, unit price, the approved sample as the quality standard, the delivery date, the payment schedule and what happens if bulk does not match the sample.

  5. Inspect before final payment

    Hold back part of the payment until you or an inspector has checked a sample of finished units against the approved pre-production sample.

Landed cost: duty and fees on imported clothing

Landed cost is what one finished garment costs once it reaches your door. For imported clothing it is the factory price plus freight, insurance, US duty, CBP fees and any broker or delivery charges. Compare factories on landed cost, not on the unit price in the quote.

Duty depends on the garment's tariff code in the Harmonized Tariff Schedule and the country it was made in. For example, the general duty rate for cotton knit T-shirts (heading 6109.10.00) is 16.5%. Additional duties on goods from some countries can apply on top of the general rate, so look up the code and the country before you compare quotes.

Shipments valued at $2,500 or less can usually clear on an informal entry; above that you need a formal entry. The limit drops to $250 for goods that carry the extra duties listed in Chapter 99 of the tariff schedule. Formal entries also pay a merchandise processing fee of 0.3464 percent of the value, with a minimum and a maximum per entry. Many small brands hire a licensed customs broker to file, though certain resident importers and exporters may file entries on their own behalf.

What goes into the landed cost of an imported garment
CostHow it is chargedWhere to check it
Factory pricePer unit, from the quote (FOB or EXW)The factory's written order
Freight and insurancePer shipment, by weight or volumeA freight forwarder's quote
DutyA percentage of the customs value, by tariff codehts.usitc.gov
Merchandise processing fee0.3464 percent of the value on formal entriescbp.gov
Customs brokerPer entry, if you use oneThe broker's fee schedule

Example: 300 cotton knit T-shirts at a $6 factory price, a customs value of $1,800. The duty is 16.5% of $1,800 at the general rate. The shipment is under the $2,500 informal entry limit, unless the shirts carry Chapter 99 duties, in which case the $250 limit applies. Add freight and any broker fee, then divide the total by 300 for the landed cost per shirt. Duty rates and fees change, so check the current schedule before you order. This page is general information, not legal, tax or customs advice.

Extra steps if you sell children's clothing

Clothing primarily designed or intended for children 12 years of age or younger is a children's product under the Consumer Product Safety Improvement Act (CPSIA). It must be tested for compliance to applicable safety rules by a third-party, CPSC-accepted laboratory, and the US manufacturer or importer must issue a Children’s Product Certificate (CPC) based on those tests.

Children's clothing also needs distinguishing, permanent marks on the product and any packaging, showing who made it and when. Ask a factory whether it has made children's clothing for the US market before, and who arranges and pays for the lab tests. If the factory is overseas, you as the importer issue the certificate, so the paperwork is yours even when the factory arranges testing. CPSC says that from July 8, 2026, importers of most regulated consumer products must file certificates electronically with CBP.

Clothing manufacturers for small business: starting small

If a factory's minimums are more than you can sell, there are smaller first steps. Small domestic cut and sew workshops and sample rooms often take short runs at a higher unit price. Decorating blanks lets you test designs with no sewing at all. Print on demand removes inventory, at the cost of a lower margin per sale.

Whichever route you take, the garment still needs a label with fiber content, country of origin and either the company name or the Registered Identification Number (RN). State and local rules on business registration and sales tax also apply, and they vary by state and city. This page is general information, not legal or tax advice.

Where Nation fits

Nation

Category: an AI store builder

Publisher

Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. It does not make clothing or connect brands with factories.

Limits today

  • Status: open: describe what you make in the app onboarding and the store builds itself.
  • Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
  • Shopper marketplace: no shopper marketplace has been announced.
  • Track record: no independent reviews or public stores yet.

Nation publishes this page. Nation does not make clothing, and no factory paid to be mentioned.

Describe what you make

Questions about finding a clothing manufacturer

How do I find a clothing manufacturer for my brand?

To find a clothing manufacturer for your brand, start with a tech pack, then build a list from sourcing directories, trade shows, fabric suppliers and US import records. Send every factory the same request, compare minimums and lead times, and pay for samples from your best two or three before you place a bulk order.

What is a cut and sew manufacturer?

A cut and sew manufacturer makes garments from scratch using your pattern: it cuts the fabric, sews the pieces and adds trims and labels. You control the fabric and the fit. It differs from a decorator, who prints or embroiders on blank garments that were already made by someone else.

Are there clothing manufacturers for small business orders?

Clothing manufacturers for small business orders exist, mostly small domestic workshops and sample rooms that take short runs at a higher price per unit. Ask how the minimum is counted, per style, colour or fabric. Blank decoration and print on demand are lower-risk ways to test designs before a cut and sew order.

How do I check if a clothing factory is real?

To check a clothing factory, ask for the names of its US importer and of US brands it makes for, and search those names on the FTC's RN Search screen. Read US import records to see which brands it ships to, call two references, and pay for a sample before any bulk deposit.

What duty do I pay on clothing made overseas?

The duty on clothing made overseas depends on the garment's code in the Harmonized Tariff Schedule and its country of origin. Cotton knit T-shirts have a general rate of 16.5%, and extra Chapter 99 duties can apply to some countries. Formal entries also pay a merchandise processing fee of 0.3464 percent of the value.

Describe what you make

Nation is an AI store builder. It is open: describe what you make in the app onboarding and the store builds itself. Describe what you make and continue in the app.