Skip to the answer

Law label requirements for stuffed toys, pillows and bedding

By Nation 10 min read

Quick answer

A law label is the tag a state requires on stuffed toys, pillows, bedding and upholstered furniture, stating the filling and the maker's registration number. 13 states and the City of Detroit require makers to register as part of labeling, including Pennsylvania, Ohio and Massachusetts. In Pennsylvania a stuffed toy label must say "All New Material", "All Recycled Material" or "Blend of New and Recycled Material", plus your Pennsylvania registration number.

Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, and this page is general information, not legal advice. See where Nation fits.

What a law label is and what the requirements cover

Law label requirements are state rules for products with hidden filling. Because a buyer cannot see what is inside a plush toy or a pillow, states require a tag that says what the filling is, whether it is new, and which registered company made the item. The tag is usually called a law label, and in the regulated states the number on it comes from a registration you need before you sell.

According to the International Association of Bedding and Furniture Labeling Officials, 13 states and the City of Detroit require registration as part of the labeling process. Federal toy safety rules apply on top of these state rules and are a separate process, covered in our toy safety standards guide.

Ohio's Department of Commerce gives a clear picture of what counts. Its rules apply to bedding, upholstered furniture, stuffed toys and similar articles with filling, and the examples include stuffed toys and dolls, pillows, comforters, quilts, cushions, sleeping bags and padded story books, stuffed holiday items and promotional items. Items not covered include wall hangings, potholders, placemats, boxed Halloween costumes and wearing apparel.

  • Plush toys, stuffed animals and dolls with stuffing.
  • Bed pillows, decorative pillows, bolsters and nursing pillows.
  • Comforters, quilts, mattress pads and sleeping bags.
  • Cushions for chairs, benches, stadium seats and outdoor furniture.
  • Upholstered furniture, from ottomans to sofas.

Rules vary by state, and some cities add their own. This page is general information about the published rules, not legal advice. Before you ship, check with each state agency named below.

Law label requirements in Pennsylvania, Ohio and Massachusetts

The three states below are the ones plush and pillow makers most often ask about. Each runs its own registration, and each reads the label against its own rules. The table sets out what each state asks for, as published by the agency that runs the program.

Stuffed toy and bedding registration in three states
RequirementPennsylvaniaOhioMassachusetts
AgencyDepartment of Labor & Industry, Bedding and UpholsteryDepartment of Commerce, Bedding, Upholstered Furniture and Stuffed Toy sectionDepartment of Public Health, Division of Food Protection
Who registersanyone who makes or imports new, recycled or blended stuffed toys into Pennsylvaniamanufacturers, importers, distributors and wholesalersMakers and sellers need a license from the Division of Food Protection
ProductsStuffed toysBedding, upholstered furniture and stuffed toysStuffed toys, bedding and upholstered furniture
Sample and testinga finished sample of each toy, not a prototype, plus a lab report showing the toy passes sections 47.317, 47.321 and 47.322Toys: the entire item; pillows: a 12" x 12" sample of the filling, or the whole item if it has two or more fillingsa separate application and fee payment for each manufacturing facility
Feeset in the department fee schedule; a craftsperson who makes stuffed toys as a leisure pursuit, with under $1,000.00 a year in stuffed toy sales, pays no registration fee but must still register annually$0.04 per item on products brought into or sold in Ohio, plus a separate invoice for testing, based on the number and type of tests$300 per manufacturing facility
Termone year, renewed annuallyan annual licenserenewed every year, with a serial number assigned by the department
Other states' numbersPennsylvania does not accept stuffed toy registrations issued by other statesOhio can recognize another state's registration numberNot stated on the application page
Processing time30 days on averageNot stated; you receive a laboratory report of analysis that includes law label validation6 to 8 weeks

Each state counts factories separately. In Pennsylvania each manufacturing facility needs its own registration number, and in Ohio every plant needs a separate number, in the U.S. or overseas.

What a uniform law label must show

Ohio's administrative code spells out the bedding version of the label in detail, and the stuffed toy version is shorter. The bedding rules are the clearest published model of what a uniform law label shows.

For bedding and upholstered furniture made of new material, Ohio requires a label that is white, printed in black, not less than two by three inches, with type not less than one-eighth of one inch high. Pillows, comforters and quilts carry the tag sewn into one of the outside seams.

  • New material: the words "All New Material" when every part of the filling is new.
  • Filling content: the filling contents, in the terms the rules define. Example: polyester fiber or feathers. For a sofa with cushions, the filling in the body and in the cushions must be stated separately.
  • Registry number: the registration number, preceded by the issuing state and followed by the plant state. Ohio's own example is OH 23456 CA.
  • Name and address: the registered name and address of the manufacturer, maker, distributor or vendor, as a street address, because a street address; post office box numbers are not acceptable.

Stuffed toy labels are looser on format. In Ohio the form, design, colour and size are left to the manufacturer or importer, as long as it is legible, and the label must state "All new material" plus the types of filling used. In Pennsylvania the toy label must say "All New Material", "All Recycled Material" or "Blend of New and Recycled Material", plus your Pennsylvania registration number, on a white law label.

Ohio checks the label as part of registration: it requires that every stuffed toy or item of bedding sold needs a law label with a registration number, and after its lab tests your sample you receive a laboratory report of analysis that includes law label validation.

Pennsylvania's stuffed toy law changes

Pennsylvania amended its Stuffed Toy Manufacturing Act with Act 30 of 2024 (HB 1333), approved on June 28, 2024 and in force 60 days after approval. The change matters for plush makers who use recycled polyester fill: the 1961 act's title said material used in stuffed toys had to be new.

Under the amended act, all material in stuffed toys must be new or recycled material. The label must state that new, recycled or a mix of new and recycled materials, and the registration number must be preceded by REG. NO. PA..

  • Recycled fill is allowed, and the label says so: new, recycled or a blend.
  • A manufacturer may not use no child labor, forced labor or slave labor in making the toys.
  • For material of animal origin, such as wool or feathers, outer coverings with animal-origin material must be properly sterilized, and manufacturers using animal-origin material must also obtain a certificate of disinfection from the department.
  • Under the amended act, the Department of Labor & Industry has the authority to enforce the act, with a fine of $300 to $500 for each offense.

What to do before you ship plush or pillows into these states

These steps follow the order the agencies process applications. Do them for each state you sell into, because Pennsylvania does not accept other states' numbers and Ohio and Massachusetts run their own files.

  1. List what you make and what is inside

    Write down every product with filling and the exact fill for each one. Example: polyester fiber, cotton, foam, feathers, beans or pellets. Pennsylvania tests toys for flammability, materials and design safety, and Ohio sends a laboratory report of analysis that includes law label validation, so the list has to match the products.

  2. Get your toys tested

    Pennsylvania asks for a lab report showing the toy passes sections 47.317, 47.321 and 47.322, from a US-based lab or a Consumer Product Safety Commission (CPSC) certified lab. Ohio's lab runs its own filling analysis, and you receive a separate invoice for testing, based on the number and type of tests.

  3. Apply and send samples

    Pennsylvania needs a finished sample of each toy, not a prototype. For toys, Ohio needs the entire item, and with any application a product sample plus the law label or a draft label, sent with the application. Massachusetts takes the application through its eLicensing portal, at $300 per manufacturing facility.

  4. Print the label with the number

    Once a number is issued, print it on the law label in the format each state sets. In Pennsylvania that means the REG. NO. PA. prefix. Ohio publishes a list of companies that provide law label printing services, and for bedding the label has to meet Ohio's size and colour rules.

  5. Renew every year

    Pennsylvania, Ohio and Massachusetts registrations all run for a year. In Pennsylvania one year, renewed annually, and if it lapses, the business cannot sell products covered by the Pennsylvania stuffed toy law.

Law labels for small makers and online sellers

Selling online does not take you outside these rules. Pennsylvania's label rule applies to all stuffed toy products you are selling or shipping into Pennsylvania, so a maker who ships plush to buyers there needs the registration and the label even with no shop in the state.

There are a few carve-outs. In Pennsylvania a craftsperson who makes stuffed toys as a leisure pursuit, with under $1,000.00 a year in stuffed toy sales, pays no registration fee but must still register annually. Also, a Pennsylvania store that only sells stuffed toys does not need a special license, and toys intended for pets are not regulated. These exemptions are narrow, and they apply in Pennsylvania only.

  • Making plush to sell: register in each regulated state you ship to, and label every toy.
  • Making pillows or quilts: check Ohio's sample rule, which asks for a 12" x 12" sample of the filling, or the whole item if it has two or more fillings.
  • Making filled jackets or vests: Utah requires registration for companies selling filled clothing, and according to IABFLO filled jackets and clothing must have a sewn-in label that reflects the filling.
  • Reselling toys made by someone else: check the maker's law label carries a valid number for the states you sell into.

If you are starting a plush business, budget time for the first registrations before launch. Rules vary by state and can change, so read the agency page for each state before you ship. This page is general information, not legal advice.

Where Nation fits

Nation

Category: an AI store builder

Publisher

Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. This page covers state rules only.

Limits today

  • Status: open: describe what you make in the app onboarding and the store builds itself.
  • Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
  • Shopper marketplace: no shopper marketplace has been announced.
  • Track record: no independent reviews or public stores yet.

Nation publishes this page. It is general information about published state rules, not legal advice.

Describe what you make

Questions about law labels

What is a law label?

A law label is the tag states require on stuffed toys, pillows, bedding and upholstered furniture. It states whether the filling is new, what the filling is, and the maker's registration number. 13 states and the City of Detroit require registration as part of the labeling process, so the number on the label comes from a state registration.

Do I need a law label to sell plush toys online?

You need a law label on plush toys sold online into states that regulate stuffed toys, even with no shop there. Pennsylvania requires registration from anyone who makes or imports new, recycled or blended stuffed toys into Pennsylvania, and Ohio requires that every stuffed toy or item of bedding sold needs a law label with a registration number.

What are the law label requirements in Pennsylvania?

Pennsylvania's law label requirements for stuffed toys are short. The label must say "All New Material", "All Recycled Material" or "Blend of New and Recycled Material", plus your Pennsylvania registration number, on a white law label. The number must be preceded by REG. NO. PA., and Pennsylvania does not accept stuffed toy registrations issued by other states.

Can a stuffed toy use recycled fill in Pennsylvania?

A stuffed toy can use recycled fill in Pennsylvania since Act 30 of 2024 (HB 1333) took effect. The act says material must be new or recycled material, and the label must state that the material is new, recycled or a mix of new and recycled materials.

How much does law label registration cost?

Law label registration costs differ by state. Massachusetts charges $300 per manufacturing facility. Ohio charges $0.04 per item on products sold in the state, plus a separate invoice for testing, based on the number and type of tests. Pennsylvania fees are set in the department fee schedule, and Pennsylvania hobby crafters with under $1,000.00 a year in stuffed toy sales pay no fee.

Describe what you make

Nation is an AI store builder. It is open: describe what you make in the app onboarding and the store builds itself: leave a description of what you make and your email to join the waitlist.