Quick answer
Meta AI ads run under the name Advantage+: a campaign setup for the sales, app promotion or leads objectives that hands audience, placements and budget to Meta's AI, and Advantage+ creative, which can change your images, video and text. You still choose the objective, the product, the budget amount, the uploaded creative and account-wide limits such as locations and minimum age. Some enhancements may be turned on by default, but you can turn them off at any time, so check the previews before you publish.
Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, so it is not in any comparison here. See where Nation fits.
What Meta AI ads are: Advantage+ in plain terms
When people search for Meta AI ads, they usually mean Meta Advantage+. Meta describes Advantage+ as a suite of products that helps you maximise performance by using AI to optimise campaigns and match ads to the people most likely to act. It covers two jobs that are easy to mix up: deciding who sees the ad, where and with how much money, and changing what the ad itself looks like.
The first job belongs to the Advantage+ campaign setup. If you pick the sales, app promotion or leads objective in Meta Ads Manager, you see the Advantage+ setup. For a shop that sells online, the relevant version is the Advantage+ sales campaign, which Meta calls the most efficient way for advertisers using the sales objective to drive online sales.
The second job belongs to Advantage+ creative. It works at the ad level and can crop, expand, animate, rewrite or add to the images, video and text you upload. You can use either one without the other.
This page covers Meta's own tools only. It does not rank ad tools or compare Meta with other ad platforms.
Advantage+ sales campaigns, formerly Advantage+ shopping campaigns
Meta used to offer a separate campaign type called the Advantage+ shopping campaign. Meta's developer announcement says the new setup removes the old choice: instead of having to select between running an Advantage+ shopping campaign (ASC) or a manual campaign. The same announcement scheduled the end of creating or updating the old shopping campaign type through its Marketing API for Q1 2026. In Ads Manager you now start a sales campaign, and three settings decide how much of it Meta's AI runs.
Meta's help page says Advantage+ audience, placement and budget together switch on its most advanced optimisations. Meta reports 9% improvement in cost per conversion, on average for advertisers who used these campaigns. That is Meta's own average across its advertisers, so treat it as a claim to test on your shop rather than a result to expect.
- Audience: Advantage+ audience lets Meta's AI find buyers. Meta says its AI uses numerous pieces of information to find your audience, and names past conversions, Meta Pixel data and interactions with previous ads as examples.
- Placements: Advantage+ placements lets Meta place the ad across its apps instead of you choosing each spot.
- Budget: Advantage+ campaign budget moves money between ad sets toward whichever is getting results.
Manual control has not gone away. Meta's help page states: Manual campaign features are all still available. Some ad types also get less automation, because may not have access to all Advantage+ features.
What turns Advantage+ on and off in a sales campaign
Ads Manager shows a label, Advantage+ on or Advantage+ off, on the budget, audience and placements sections. Per Meta, the label switches to off if you narrow your Budget, Audience or Placements too far. The table lists what Meta's help page says about each section.
If you do exclude a placement, Ads Manager offers an option called Allow limited spend to excluded placements. It lets Meta spend up to 5% of your budget on each excluded placement when it expects better results. Untick it if you want the exclusion to be strict.
One older control is gone. The existing customer budget cap, which let shopping campaigns limit spend on people who had already bought, is no longer available. Meta says you can still do the same thing manually.
Which settings stay with you
Advantage+ automates delivery, but several decisions stay with the advertiser in every campaign. These are the ones that matter most for a small shop.
- The objective and the result you optimise for, such as purchases.
- The budget amount, and whether it is daily or lifetime. You can stop an ad at any time by pausing it in Meta Ads Manager.
- The products, landing page, images, video and text you supply. Meta's AI works from these.
- Which Advantage+ creative enhancements stay on, ad by ad.
- Account controls. These apply to all campaigns in your ad account, for example if you can't show ads to people under a certain age or ship products to some countries.
Account controls live in Advertising settings, not in the campaign. You can set the locations you serve, a minimum age, brand-protection exclusions and placement exclusions there. Meta notes the feature may not be available to you right now, and that changes to existing campaigns may take up to 48 hours. Use them, rather than narrowing each campaign, to keep Advantage+ audience away from countries you cannot ship to.
What Advantage+ creative changes in your ads
Advantage+ creative is the part of Meta AI ads that edits or generates the ad itself. Meta's help page says the media and text you upload may be adjusted to help improve ad performance while maintaining the core message of your campaign. Which enhancements you see depends on your selected ad format, placements and whether you're using a catalog. Features that use AI show an AI logo beneath the feature name in Ads Manager.
The table groups the enhancements a shop is most likely to meet. Meta's help page lists more.
Ad images created or materially edited with some of Meta's generative AI features may show AI info on the About this ad screen or next to the Ad label. Some advertisers may not have immediate access to all generative AI features, including certain regulated industries and countries.
How to review or switch off Advantage+ creative enhancements
Meta's own advice is to check the ad preview before you publish. Some enhancements may be turned on by default, but you can turn them off at any time. Previews are examples of possible versions of optimized ad impressions, so they show samples rather than every version a buyer may see.
Open the ad in Ads Manager
For a new ad, go through ad setup until you reach Enhancements in the Ad creative section. For a live ad, go to Ads, tick the ad, click Edit and find the Advantage+ creative section, which shows how many enhancements are on.
Open Advanced preview
In the Ad preview, click Expand. Meta notes that some enhancements can only be switched off in Advanced preview and do not appear in the Ad creative section, so check both places.
Review each enhancement card
On the Advantage+ creative tab, use the arrows on each card to see possible variations, click Customize where offered, or turn the enhancement off. The Placements tab shows how the ad changes by placement.
Save and publish
Click Save, then complete the rest of the ad and click Publish.
Budget guidance for Advantage+ on a small shop
Meta does not publish one fixed minimum: minimum budgets may vary by country and objective. A few published rules help a small shop set a workable number.
- Give the AI enough results to learn. An ad set usually leaves the learning phase after about 50 results in the week after the ad set's last significant edit. Meta's advice is: Set a budget large enough to get enough total results and avoid frequent budget changes.
- Use one campaign budget instead of many small ad sets. With Advantage+ campaign budget, Meta says the risk of under-delivery is lower, and it keeps the budget section in the Advantage+ on state.
- If you set a cost per result goal, your daily budget should be at least 5 times the amount of your cost per result goal. Meta's example: a cost per result goal of $5 your daily budget should be at least $25.
- Expect uneven daily spend. Meta may spend up to 75% over your daily budget on a good day, but no more than 7 times your daily budget in a week.
Example: a shop with a product page that converts poorly will not be fixed by Advantage+. The AI finds people likely to buy from the page you send them to, so a clear product page, working checkout and the Meta Pixel or Conversions API on the purchase step come first.
When a manual campaign still makes sense
Advantage+ works best when Meta has purchase data and room to explore. A manual setup, with Advantage+ off on one or more sections, is still a reasonable choice in these cases.
- Retargeting a known group, such as past site visitors. Meta recommends testing Advantage+ audience for almost all campaign types, except retargeting campaigns.
- You can only sell in a small area. Set account controls first; narrow the campaign audience only if account controls are not available to you yet.
- Your creative has to stay exactly as approved, for example for a licensed design or regulated wording. Switch off the enhancements you cannot accept.
- You want a clean test. Run an A/B test of an Advantage+ setup against a manual one with the same budget and creative, then compare cost per purchase.
Meta's opportunity score can show Advantage+ sales campaign recommendations. Meta itself says opportunity score does not reflect your actual or future performance, so weigh each recommendation against your own results.
Where Nation fits
Nation
Category: an AI store builder
Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. This page explains Meta's own ad tools and does not compare Nation with them.
Limits today
- Status: open: describe what you make in the app onboarding and the store builds itself.
- Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
- Shopper marketplace: no shopper marketplace has been announced.
- Track record: no independent reviews or public stores yet.
Nation publishes this page. Nation is not ranked or compared here, and the page covers Meta's tools only.
Describe what you makeQuestions about Meta AI ads and Advantage+
What are Meta AI ads?
Meta AI ads are ads that use Meta Advantage+, which Meta calls a suite of products that helps you maximise performance by using AI. Advantage+ campaigns hand audience, placements and budget to Meta's AI, and Advantage+ creative can edit or generate the images, video and text in each ad. You still choose the objective, budget amount and uploaded creative.
What is the difference between Advantage+ shopping and Advantage+ sales campaigns?
Advantage+ shopping campaigns were a separate campaign type. Meta replaced the choice between them and manual campaigns with one setup for the sales objective, so an Advantage+ sales campaign is a normal sales campaign that uses Advantage+ audience, placement and budget. Through the Marketing API, shopping campaigns stop being created from Q1 2026.
Can I turn off Advantage+ creative?
Advantage+ creative enhancements can be switched off one by one. Some enhancements may be turned on by default, but you can turn them off at any time. In Ads Manager, open the ad's Advantage+ creative section and also check Advanced preview, because some enhancements can only be switched off there. Save and publish the ad again after the change.
Does an Advantage+ sales campaign still let me exclude countries or ages?
An Advantage+ sales campaign still respects account controls, which apply to all campaigns in your ad account. Use them if you can't show ads to people under a certain age or ship products to some countries. Using account controls will not affect your campaign's Advantage+ state. Inside the campaign, you can also raise the minimum age up to 25 or exclude a custom audience and keep Advantage+ on.
How much budget does an Advantage+ campaign need?
An Advantage+ campaign has no single published minimum, because minimum budgets may vary by country and objective. Meta advises a budget large enough for the ad set to reach about 50 results in the week after the ad set's last significant edit. With a cost per result goal, the daily budget should be at least 5 times the amount of your cost per result goal.
Will people know my Meta ad was made with AI?
A Meta ad made with some generative AI features may show a label. Images created or materially edited with certain Meta AI features may include AI info on the About this ad screen. In Ads Manager, features that use AI carry an AI logo beneath the feature name, so you can see which enhancements use generative AI before you publish.