Quick answer
To start a t-shirt business, pick a niche and a print method, wash-test samples and register the business. FTC rules require each shirt's label to show fiber content, country of origin and either the company name or the Registered Identification Number (RN), plus care instructions. On a $25 shirt, fees on the sale run from $1.03 on Fourthwall or Big Cartel to $3.80 on eBay.
Nation, an AI store builder, publishes this page. It is not in the fee comparison. See where Nation fits.
How to start a t-shirt business in eight steps
The same order works for a side project or a full apparel line.
Pick a niche and a design style
Decide who the shirts are for, such as a hobby, a job, a town or a fan community. The niche tells you which blanks to buy and where to find buyers.
Make or license the designs
Draw your own artwork or pay a designer under a written agreement. Leave out logos, characters and photos that belong to someone else.
Choose how the shirts get made
Print on demand, a local screen printer, or your own heat press or printer. Each trades upfront spend against the cost of each shirt.
Order and wash-test samples
Wear and wash each sample several times, and check the fit, the shrinkage and whether the print cracks or fades. Your care label should match what the test shows.
Register the business
Get the registrations your state and city require, and check whether you need a seller's permit to collect sales tax.
Label every shirt
Add the fiber, origin, business name or RN, and care details set out in the label rules below.
Price from your real costs
Add the blank, printing, labels, packaging, shipping and platform fees, then set a price that leaves a margin after all of them.
Pick where to sell and launch small
Release a few designs in a limited size range and reorder only what sells.
How to make t-shirts to sell: print methods compared
The table compares six common ways to make t-shirts to sell. They differ in upfront spend, the cost of each shirt and how many colors a design can carry. You can test designs with print on demand, then move the ones that sell to a method with a lower cost per shirt.
Federal label rules for t-shirts
Two FTC rules set what goes on a t-shirt label: the Textile Act rules, for what the shirt is made of, where it was made and who makes or sells it, and the Care Labeling Rule, for how to clean it. This is general information, not legal advice, and rules vary by state and city.
Textile labels must identify fiber content, country of origin and either the company name or the Registered Identification Number (RN), and manufacturers and importers must attach care instructions to clothing. A finished t-shirt label covers four things:
- Fiber content, written as the generic fiber names and percentages by weight of each constituent fiber, listed in descending order of predominance.
- Country of origin, on a label attached to the inside center of the neck. Online listings also need a statement that the product was made in the U.S.A., imported or both.
- Your business name or an RN, a number issued and registered by the FTC. A brand name alone does not count: the name can't be a trademark, trade name, brand, label or designer name, unless that's the name under which the company does business. There is no charge for an RN, and online applications are usually processed within 3 business days or sooner. An RN is not required in order to do business in the U.S.
- Care instructions, attached permanently and securely and legible during the useful life of the product. The minimum washing instruction is a method of washing and a method of drying, such as "Machine wash. Tumble dry."
Printing care instructions inside the shirt instead of sewing in a tag is allowed if the instructions meet the Rule's requirements of permanence and legibility. You also need a reasonable basis for all care instructions and warnings, which is one more reason to wash-test samples.
Made in USA claims are strict. Only a product made completely in the U.S. of materials that were made in the U.S. may carry an unqualified Made in U.S.A. label, so printing in the US on an imported blank does not qualify. For an imported blank, the country of origin is the country where it was processed or manufactured, as determined under the laws and regulations enforced by Customs.
If you swap the blank maker's tag for your own label, that is legal as long as the new label lists the name or RN of the person or company making the change. Note that the label you substitute also must have the required information, and you must keep records for three years that show the information on the removed label and the company from which the product was received.
CPSC safety rules: flammability and shirts for kids
The CPSC clothing flammability standard covers all textiles used in adult and children's wearing apparel. It sorts fabrics into three classes of flammability, based on their speed of burning. You are not permitted to use Class 3 textiles in clothing for the U.S. market.
Two testing exemptions can cover t-shirt fabric. The first covers plain surface fabrics weighing 2.6 ounces per square yard or more, regardless of fiber content; the CPSC names oxford, chambray, jersey cotton, and stretch knit as common plain surface fabrics. The second covers plain or raised fabrics made of acrylic, modacrylic, nylon, olefin, polyester, wool, or any combination of these fibers, regardless of weight. Check the fabric weight on the blank maker's spec sheet.
Adult wearing apparel is required to have a General Certificate of Conformity, also known as a GCC, but the CPSC will not pursue compliance or enforcement actions against firms that fail to issue a GCC for adult wearing apparel that is exempt from testing. Adult wearing apparel does not need to be tested at a third party, CPSC-accepted lab.
Shirts for kids carry more rules. A children's product is one designed or intended primarily for children 12 years of age or younger. If your designs, sizes or listings aim at that age group, these apply:
- Lead: accessible parts must meet the lead content limit of 100 parts per million (ppm). Fabric itself is easier: dyed and undyed textiles that are not treated or adulterated do not need to be tested for total lead content.
- Prints: any screen-printing inks used on the garments are also subject to lead in paint requirements, and paints or surface coatings must not contain a concentration of lead greater than 90 ppm.
- Testing: required tests go to a third-party, CPSC-accepted laboratory. A qualifying small batch manufacturer may be eligible for relief from third-party testing to certain safety rules.
- Paperwork: after passing tests you issue a Children's Product Certificate, also known as a CPC. Children's products and their packaging are required to have tracking labels.
Designs you can legally print and sell
Copyright covers original artwork from the moment it is created and fixed in a tangible form, so print only art you made or hold a written license for. In the US, registration is voluntary, but you have to register if you wish to bring a lawsuit for infringement of a U.S. work. The registration fees are in the cost table below.
A trademark protects words, phrases, symbols, or designs identifying the source of the goods or services of one party, so leave other companies' names and logos off your shirts, including sports teams and bands. To protect your own shop name, the base fee for a federal trademark application is $350 per class. The USPTO also charges additional fees for applications that are incomplete or contain custom identifications of goods or services.
How much it costs to start a t-shirt business
Print on demand needs little money before the first sale. Printing your own shirts, or ordering a screen-printed batch, needs money for equipment or stock first.
Where to sell t-shirts and what each platform takes
Example: one $25 t-shirt sold online. Own stores such as Shopify, Fourthwall and Big Cartel charge card processing, and you bring the shoppers. Marketplaces bring shoppers and take a larger share.
- Shopify baseline $1.03 plus $39 a month on Basic Card 2.9% + 30¢ $1.03
- Fourthwall $1.03 free plan, or $19/month for Pro. Physical products never have a platform fee Card 2.9% + 30¢ $1.03
- Big Cartel $1.03 free for up to 5 products, or $15 a month on Platinum Big Cartel 0% $0, Stripe 2.9% + $0.30 $1.03
- TikTok Shop $1.50 no monthly plan Referral 6% $1.50
- Etsy $2.83 no monthly plan Listing $0.20, Transaction 6.5% $1.63, Processing 3% + $0.25 $1
- eBay $3.80 no monthly plan Final value 13.6% $3.40, Per order $0.40
Assumes a $25 shirt, free shipping, no tax, a standard US card, no ads and no currency conversion. TikTok Shop and eBay use their most-categories rates.
How to price a t-shirt: a worked example
Example: a print on demand shirt has a $12 base cost and $5 shipping, and you sell it for $25 with shipping included. That leaves $8 before fees. On Shopify the card fee is $1.03, plus the monthly plan spread across all orders; on Etsy the fees are $2.83.
Example: the same design screen printed in a batch of 48 at $9 a shirt leaves $11 after the $5 shipping and before fees, at the same $25 price. The margin is higher, but the $432 batch is paid before anything sells, and unsold sizes stay on your shelf.
Shipping times for made-to-order shirts
Print on demand shirts are made after the order arrives, so state a realistic shipping time that includes your supplier's production time. Under the FTC's mail order rule, if you make no shipment statement you need a reasonable basis for believing that you can ship within 30 days. If an order will be late, you must seek the customer's consent to the delayed shipment.
Where Nation fits
Nation
Category: an AI store builder
Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. Plans start at $39 a month plus a 2% fee on each sale, with a 14-day trial for $1.
Limits today
- Status: open: describe what you make in the app onboarding and the store builds itself.
- Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
- Shopper marketplace: no shopper marketplace has been announced.
- Track record: no independent reviews or public stores yet.
Nation publishes this page.
Describe what you makeQuestions about starting a t-shirt business
How do I make t-shirts to sell?
To make t-shirts to sell, choose a print method and test it on samples first. Print on demand means you hold no stock, because a supplier prints each shirt after it sells. Screen printing suits larger runs of simple designs, while direct to garment and heat transfers suit small full-color batches.
Do t-shirts need labels to be sold?
T-shirts sold in the US need labels. FTC rules require fiber content, country of origin and either the company name or the Registered Identification Number (RN), plus care instructions attached permanently and securely. Printing care instructions inside the shirt is allowed if the instructions meet the Rule's requirements of permanence and legibility. This is general information, not legal advice.
Can I sell shirts with logos or characters on them?
Selling shirts with another company's logo, a team name or a cartoon character is risky without a written license from the owner. Copyright protects artwork from the moment it is created and fixed in a tangible form, and a trademark protects words, phrases, symbols, or designs identifying the source of the goods or services of one party. Print designs you made or licensed.
Do I need a license to sell t-shirts?
A t-shirt business usually needs the same registrations as any small business: the business license your state or city requires, and possibly a seller's permit to collect sales tax. Rules vary by state and city, so check with your state revenue agency and local office. This is general information, not legal or tax advice.