Quick answer
To digitize artwork, scan flat work on paper such as drawings, prints and watercolors, and photograph paintings, textured pieces and anything larger than your scanner bed. The US federal FADGI guidelines set 400 ppi for prints and drawings and 450 ppi for paintings at their 3-star level, saved as TIFF or JPEG 2000. Keep that master file untouched and make smaller, edited copies for each printer.
Nation, an AI store builder, publishes this page. It is open: describe what you make in the app onboarding and the store builds itself, and this guide does not depend on it. See where Nation fits.
How to digitize artwork: scan or photograph?
There are two ways to digitize artwork: scan it or photograph it. The choice depends on three things: the size of the piece, its surface, and the medium. A scanner gives even light and sharp detail with little setup, but only for flat work that fits on the glass. A camera handles any size and keeps some of the texture of a painted surface, but it needs controlled lighting to get even, glare-free results.
The Federal Agencies Digital Guidelines Initiative (FADGI), a US federal guidelines group, publishes the Technical Guidelines for Digitizing Cultural Heritage Materials, Third Edition, revised 2023. It groups artwork in two ways. Its prints and photographs category covers photographic prints, graphic-arts prints, drawings, some paintings such as watercolors, and some maps, and recommends planetary scanners, digital cameras and flatbed scanners. Its paintings category recommends planetary scanners and digital cameras only, and lists drum scanners and flatbed scanners as not recommended.
What resolution to scan artwork for prints
Resolution is measured in pixels per inch (ppi) of the original. FADGI sets four quality levels, from 1-star to 4-star, with a minimum resolution for each. These are archive standards for museums and libraries. Meeting the 3-star level gives you a file you can print large and crop without going back to the original.
For paintings, FADGI adds that greater than 600 ppi is almost always required for 4-star, because painted detail is finer than the minimum captures. For prints for sale, the useful question is how large you want to print: a higher ppi on the original lets you print bigger than the original at the same quality.
Colour matters as much as resolution. At 3-star and above, for both paintings and prints, FADGI lists the Adobe RGB (1998), ProPhoto or ECIRGB_v2 colour spaces rather than sRGB, and for prints and photographs it asks for 16-bit color at or above 3-star. Master files are saved as TIFF or JPEG 2000, which keep every pixel without compression loss.
Phone, camera or flatbed scanner
Any of the three can digitize artwork. They differ in how much detail they capture, how even the light is, and how large a piece they can handle.
A phone is fine for listing photos, social posts and a portfolio. It is the weakest choice for prints: phone cameras usually apply sharpening, noise reduction and colour changes that are hard to switch off, and a single phone photo of a large piece spreads its pixels thinly over the whole surface. If you scan artwork with a phone, use a scanning app that corrects perspective, shoot in daylight from a window with no direct sun, and treat the result as a preview file.
How to photograph artwork for prints
This setup works for paintings and any piece too large or too textured for a scanner. It aims for even light, no glare and true colour.
Hang the artwork flat and square
Hang or prop the painting so it is vertical, or lay it flat and shoot from above. Remove the frame and any glass, which add reflections.
Set the camera on a tripod
Put the camera at the centre of the artwork, with the lens pointing straight at it, so the edges stay parallel. Use a longer focal length from further back to reduce lens distortion at the edges.
Light it from both sides
Use two identical daylight-balanced lights at equal distances on the left and right, angled in at the surface. Turn off room lights so there is no mixed colour. Avoid lights that heat the surface: for prints and drawings, FADGI does not recommend lighting that raises the surface temperature more than 4 degrees F (2 degrees C).
Add a colour target
Place a colour checker card next to the artwork in the first frame. For prints and photographs, FADGI asks for a reference target imaged with each exposure, so colour can be corrected against known values instead of by eye.
Shoot RAW at base ISO
Set the lowest ISO, a middle aperture for sharpness, and manual white balance from the grey patch on the target. Use a remote release or timer so the camera does not shake.
Check glare and evenness
Look for shine on varnish or thick paint. If you see it, move the lights further to the side. A polarising filter on the lens and on each light can reduce glare from glossy paintings.
How to scan artwork for prints
A flatbed scanner is the simplest route for flat work on paper, and the right one for scanning art for prints when the piece fits the glass.
Clean the glass
Wipe the scanner glass with a lint-free cloth before each session. FADGI notes that dust and dirt on the scanner glass can end up in the file.
Turn off automatic corrections
In the scanner software, switch off auto colour, auto contrast, sharpening and dust removal. You want an unprocessed file to edit later.
Set resolution and bit depth
Choose 400 ppi or higher for drawings and prints, at the highest bit depth the software offers, and save as TIFF.
Keep the paper flat
Close the lid gently or add weight on top. FADGI allows glass to hold work flat only where it will not harm the original, and recommends anti-reflective glass.
Scan large artwork in sections
To scan large artwork, scan it in overlapping sections, turning the paper between passes, and join them in stitching software. This works for flat media. For textured work, photograph it in one frame instead.
Preparing the file for print-on-demand and local printers
Keep the first file you make as the master and never edit it. FADGI's rule for prints and photographs is that there is no color, tone enhancement or restoration on master images; adjustments go on copies. Make a working copy, then a print file for each service.
To find the largest print size a file supports, divide its pixel dimensions by the ppi the printer asks for. Example: a scan of an 8 x 10 inch drawing at 600 ppi is 4,800 x 6,000 pixels. At an assumed printer requirement of 300 ppi, that prints at 16 x 20 inches without upscaling.
- Crop to the edge of the artwork and straighten it in the working copy.
- Correct colour against the target in the photo or scan, not by eye on an uncalibrated screen.
- Remove dust spots and scanner marks.
- Resize to the exact print size and ppi the printer lists, and add bleed if it asks for it.
- Export in the file format and colour profile the printer specifies in its own file guide. Requirements differ between print-on-demand services and local printers.
- Order one proof print and compare it with the original under daylight before you list the print for sale.
Where Nation fits
Nation
Category: an AI store builder
Nation says one description of what you make builds the store, then agents handle orders, customers and delivery and run ads, content and social posts, with you approving the work. This guide covers making print files and does not depend on Nation.
Limits today
- Status: open: describe what you make in the app onboarding and the store builds itself.
- Pricing and fees: from $39 a month plus a 2% fee per sale, with a 14-day trial for $1.
- Shopper marketplace: no shopper marketplace has been announced.
- Track record: no independent reviews or public stores yet.
Nation publishes this page. The digitizing guidance comes from the FADGI guidelines, not from Nation.
Describe what you makeQuestions about digitizing artwork
Is it better to scan or photograph artwork?
Whether to scan or photograph artwork depends on the piece. Scan flat work on paper that fits the scanner, such as drawings, prints and watercolors. Photograph paintings on canvas, textured work and large pieces. FADGI lists drum scanners and flatbed scanners as not recommended for paintings and recommends planetary scanners and digital cameras.
What resolution should I scan art for prints?
For scanning art for prints, the FADGI guidelines set 400 ppi for prints and drawings and 450 ppi for paintings at their 3-star level, rising to 600 ppi at 4-star. A higher resolution on the original lets you print larger than the original without upscaling.
Can I scan artwork with my phone?
You can scan artwork with a phone for listing photos, social posts and a portfolio. For prints, a phone is the weakest option, because its built-in processing changes colour and sharpness and it usually captures less detail than a camera or flatbed. Use even daylight, a scanning app that corrects perspective, and a colour target.
How do I photograph paintings without glare?
To photograph paintings without glare, remove any glass, use two matched lights on either side angled in at the surface, and turn off room lights. Move the lights further to the side if varnish still shines. Polarising filters on the lens and lights can reduce glare from glossy or thickly painted surfaces.
How do I scan large artwork?
To scan large artwork on a flatbed, scan it in overlapping sections and stitch them together in software. FADGI allows flat artwork may be captured in multiple tiles and stitched. Textured work should not be tiled, because capturing in tiles changes the rendering of 3D texture, so photograph textured or very large pieces in one frame with a camera instead.